Top 29 best miter saws - 2024 ranking

Any saw is suitable for making straight cuts. But it is possible to accurately cut the edge of a beam at a strictly specified angle only with the help of special equipment. For this purpose, a miter saw is used, which is in demand in construction, woodworking and furniture production, in carpentry shops, for repair or finishing work. The equipment is available in various modifications, so in order to determine which miter saw is the best, you need to consider in detail the models, types and characteristics produced.

What is a miter saw

Equipment such as a miter saw differs from the usual one in its ability to work at a strictly specified angle, for which it is often also called a miter saw, that is, capable of miter sawing. The device consists of three main blocks:

• an electric motor, the main parameters of which are power, protection against voltage surges and overloads, endurance, and the ability to work under difficult conditions;
• a saw blade with a diameter of 20 centimeters (must be durable, sharp, resistant to loads);
• working surface - a table that can be rotated at the required angle, for which locking handles and graduated scales are used.

Unlike standard equipment, miter saws provide the following capabilities:

1. Fine adjustment of the cutting angle. For this, a rotating table mechanism is used, the limiting angle value depends on the model and manufacturer, the standard is 45 degrees. Some models can rotate up to 62 degrees, which allows you to work with complex, shaped products.
2. The presence of a broaching function. Such radial-cantilever models are equipped with a motor with guides, with the help of which the saw can move across the workpiece. This function increases the cutting depth to 34 centimeters compared to conventional equipment without broaching.
3. Possibility of making bevel cuts at any desired angle in the vertical plane. This function is a feature of miter saws, which expands the scope of their application.
4. Versatility thanks to the top table, which can be used for cross-cutting and longitudinal cutting. This feature combines two machines in one installation.
5. Belt drive, providing high cutting accuracy and reduced backlash when performing work.

In addition, some models are equipped with a laser to improve accuracy and indicate the cutting line, illumination of the work area, and a dust removal system.

6 Good Inexpensive Miter Saws

For use at home or in small workshops, inexpensive miter saws are often chosen. They are easy to use and have sufficient functionality to perform the assigned tasks.

CALIBER PTE-1400/210M

Model CALIBR PTE-1400/210M with a D-shaped handle and a power of 1400 W can work with discs with a diameter of 210 mm. Cutting depth is 55 mm, width is 120 mm with a maximum rotation angle of 90 degrees. The equipment is convenient to use, perfect for a small workshop, wood processing in small and medium volumes. There is no backlight or soft start, but the cutting quality is excellent. The advantages include the presence of disk protection during operation.

Turntable with convenient markings.

Reliable fixation of the product when cutting.

Saw wheel protection.

BISON ZPT-190-1100 L

The ZUBR ZPT-190-1100 L model with a round table equipped with a convenient scale for precise rotation is equipped with a 900 W motor. The equipment can work with discs with a diameter of 190 mm. The maximum rotation angle is 90 degrees, the cutting width is 100 mm, and the depth is 60 mm.The handle is D-shaped, and there is an additional bag for collecting chips and dust.

Connecting a garbage bag.

Convenient scale for cutting accuracy.

Ergonomic handle.

DEKO DKMS1600-210 Laser

The DEKO DKMS1600-210 Laser model with a motor power of 1600 W differs from similar ones in the presence of a laser. This allows you to more accurately control the cut, improving the quality of workpiece processing. The maximum rotation angle is 90 degrees, the cutting depth is 50 mm, and the width is 110 mm. The saw is equipped with a clamp for reliable fixation of the workpiece and a bag that collects dust and shavings.

Increased motor power by 1600 W.

Works with 210 mm discs.

Availability of a bag for dust and chips.

Saw wheel protection.

Laser for precise cutting.

DIOLD PTD-1.4M-210

The DIOLD PTD-1.4M-210 saw with a 1400 W commutator motor provides cutting with a blade tilt of up to 45 degrees. The frame is cast and rigid, providing increased reliability of work. The rotation scale is convenient and understandable; the disk is covered with a special casing during operation. A laser is used to improve cutting accuracy. There is a pipe to which you can connect a bag for collecting dust and chips.

Cast frame for stability.

Laser for precise cutting.

Connecting a chip bag.

Protect the disk during operation.

Wert MS 1321

The Wert MS 1321 miter saw has a simple and well-thought-out design. A 1350 W motor and a 210 mm diameter disk make the equipment productive and convenient for processing large workpieces. The maximum cutting angle is 90 degrees, depth – 55 mm, width – up to 120 mm. A ruler with a scale is located above the table, which makes it easier to set the cutting position.

Compact dimensions.

1350 W motor.

The presence of a ruler with a control scale above the table to facilitate work.

Installation of a circle with a diameter of up to 210 mm.

PATRIOT MS 253

PATRIOT MS 253 is a miter saw with a 1600 W motor and a speed of up to 6000 rpm, capable of equally good work with wood, plastic, laminate and relatively soft materials. It is allowed to tilt the disk up to 45 degrees, installing disks up to 25.5 centimeters. There is a cut depth limiter, a convenient radius scale, and disk protection when performing work. Additionally, you can connect a bag to collect dust and shavings.

Increased power 1600 W motors.

High-quality cutting of various types of materials.

Works with discs with a diameter of up to 255 mm.

Connection pipe for connecting a bag or vacuum cleaner.

6 Best Pull Miter Saws

Saws with broaching are used if it is necessary to increase the work table. Typically, this function is needed when processing large workpieces, performing construction work, or in production.

VORTEX PT-255PL

The VORTEX PT-255PL saw with a 1900 W motor can work with discs with a diameter of up to 25.5 centimeters. The model copes with long bars, laminate, and can be used to perform a wide range of tasks. The maximum cutting width reaches 80 mm, depth – up to 340 mm. A protective casing is used for the working disk.

High power up to 1900 W.

Saw blade with a diameter of up to 255 mm.

Working with laminate, long timber.

Protective cover.

DeWALT DWS780

The DeWALT DWS780 miter saw is designed to perform complex work and produce various grooves. The tool is equipped with a 1675 W asynchronous motor (belt transmission) and has an adjustable speed of 1900-3800 rpm.The maximum tilt of the blade is 49 degrees, rotation to the right is 60 degrees, to the left is 50. The cutting depth reaches 170 mm. There is a cut positioning system using the shadow from the XPS working disk.

Powerful 1675 W motor.

Broaching with increasing depth up to 170 mm.

Positioning system for high cutting quality.

Speed ​​adjustment.

Einhell TE-SM 2131 Dual New

The Einhell TE-SM 2131 Dual New saw is equipped with a 1600 W motor and a lighting system for comfortable and precise cutting. The diameter of the working disk can reach 210 mm, the cutting depth is 65 mm, and the width is up to 310 mm. A transparent casing is used to protect the working surface of the disk during operation.

Powerful motor 1600 W.

Saw wheel diameter 210 mm.

Protective cover.

Broach for working with large workpieces.

Sturm! MS5525WM

Saw Sturm! MS5525WM is designed for precise cutting of plywood, wood, composite, and plastic blanks. It features a two-speed mode and an expansion table to reduce deviations during operation. To increase comfort, lighting is installed. With the help of such a saw you can cut metal workpieces. It is possible to connect a bag to collect dust and chips while performing work.

Working with wood, metal, composite, plastic, plywood.

Adjustable cutting speed.

Illumination of the work area.

Connection pipe for connecting a vacuum cleaner or bag.

BOSCH GCM 10 MX

The BOSCH GCM 10 MX miter saw is distinguished by high cutting accuracy, productivity, and the ability to withstand intensive use. The model is equipped with a 254*30 mm saw blade, a vice for reliable fixation of the workpiece, a support and a dust collection bag. The saw can work with various materials, the angle adjustment reaches 45-52 degrees.The disk rotation speed is 4800 rpm at idle. Engine power is 1700 W.

1700 W motor, the ability to cut wood, hard workpieces.

Scale above the work table.

Sawdust bag.

Disc protection.

Pulsar PTN 210-1900

The Pulsar PTN 210-1900 miter saw with a 1900 W brush motor is used for cutting wood, plywood, laminate, MDF, chipboard. A built-in laser is used to increase the accuracy of the work. The presence of an extended table with a draw allows you to work with large, complex workpieces. Additional features of the model include an adjusting screw, quick access to the motor brushes, motor protection from overheating.

Increased motor power up to 1900 W.

Laser for cutting accuracy.

Broach for working with long workpieces.

Adjustment of the position with a screw.

Combination miter saws are often used for industrial woodworking, furniture enterprises, construction sites. They are easy to operate, multifunctional, providing fast cutting of workpieces from different types of materials. The difference from standard models is the second table.

6 good inexpensive chainsaws for home - rating

ZUBR ZPTK-210-1500

Model ZUBR ZPTK-210-1500 is a combination saw with two working tables, a 1500 W brush motor. The equipment is suitable for precise bevel, straight, combination cutting, has convenient control, a protective cover for the disk and a bag for removing chips and dust generated during operation. A system for extending the working surface can be used to process large workpieces.

Two work tables.

A bag for collecting chips.

Performing straight and bevel cuts.Disc rotation speed is 4800 rpm at idle. Engine power – 1700 W.

1700 W motor, capable of cutting wood and hard workpieces.

Scale above the desktop.

Sawdust collection bag.

Disk protection.

Pulsar PTN 210-1900

The Pulsar PTN 210-1900 miter saw with a 1900 W brush motor is used for cutting wood, plywood, laminate, MDF, chipboard. To increase the accuracy of work, a built-in laser is used. The presence of an extended table with a broach allows you to work with large, complex workpieces. Additional features of the model include an adjusting screw, quick access to the motor brushes, and motor overheat protection.

Increased motor power up to 1900 W.

Laser for precision cutting.

Broach for working with long workpieces.

Position adjustment with screw.

5 Best Combo Miter Saws

For industrial woodworking, furniture factories, and construction sites, combination miter saws are often used. They are easy to use, multifunctional, and provide quick cutting of workpieces from various types of materials. The difference from standard models is the second table.

6 good inexpensive chainsaws for the home - rating

BISON ZPTK-210-1500

Model BISON ZPTK-210-1500 is a combination saw with two work tables and a 1500 W brush motor. The equipment is suitable for precise oblique, straight, and combined cutting, and is distinguished by convenient operation, a protective casing for the disk and a bag for removing chips and dust generated during operation. To process large workpieces, a working surface extension system can be used.

Two desktops.

Bag for collecting chips.

Performing straight and oblique cuts.

RYOBI RTMS1800-G

The RYOBI RTMS1800-G combination saw with a 1800 W brush motor is perfect for small and medium-sized workshops and furniture production. A 48TST disk is used for operation, which provides increased performance. A built-in laser is used for precision cutting; an ergonomic handle and soft start make work safe and comfortable. The advantages also include an electric motor overload protection system.

1800 W electric motor.

High saw blade manufacturer.

Laser for precision cutting.

Motor overload protection.

Interskol PTK-305/1600P

The Interskol PTK-305/1600P compound miter saw with a 1600 W asynchronous electric motor is designed for processing wood, chipboard, and MDF. The professional model is equipped with two work tables for precise cutting in bevel and angular directions. It can additionally be used for plastic, metal and composite workpieces, eliminating defects, and integrating into production lines.

1600 W asynchronous motor.

Two tables for bevel and straight cuts.

Working with metal, plastic, composite.

Wortex MS 2520LMB

The Wortex MS 2520LMB combination saw with two work tables features a powerful 2000 V electric motor. This is a corded household model that combines the functions of a circular and miter saw. The model is equipped with a convenient system for fixing the workpiece and adjusting the inclination of the working surface. The diameter of the saw blade is 250 mm, the speed is up to 4500 per minute. The cutting depth is 75 mm, the width is up to 130 mm.

High power up to 2000 W.

Combined model – miter and circular saw.

Disc with a diameter of up to 250 mm.

Increased cutting depth (up to 75 mm).

ELITECH PTK 1625

The ELITECH PTK 1625 combination saw is suitable for working with wood of various species. The model is equipped with a 1600 W motor and two work tables to expand the scope of application. The safety of working with the saw is ensured by the transparent casing for the saw blade. Using the equipment, you can make cuts at an angle using special clamps included in the kit. Speed ​​– 4800 rpm.

1600 W motor.

Two desktops.

Saw wheel protection.

5 Best Soft Start Miter Saws

Miter saws with soft start provide greater comfort and safety of operation and cutting accuracy. Not all models have this function; usually this function is needed for medium and large volumes of work, for precise cutting of various types of materials.

Makita LS1219L

Makita LS1219L saw is a professional model with the ability to broach and end, bevel, and corner cutting. Equipped with an 1800 W electric motor, a soft start system, and protection against accidental start-up. The disc deflection is 0-45 degrees, the rotating plate can be tilted up to 60 degrees in both directions. There is a system for removing chips and dust, a rubberized grip, a diagonal scale and a laser for setting the workpiece.

1800 W electric motor.

Broach for working with long workpieces.

Rotary table with angle change up to 60 degrees.

Laser for precise cutting.

Makita DLS600Z

Soft start.

Brushless BLDC motor.

Built-in 18V battery.

Lamp for illumination (connected separately, position adjustable).

BOSCH GCM 8 SDE

The BOSCH GCM 8 SDE saw with a soft start function is equipped with a 1600 W brush motor. Suitable for use in construction, production workshops, and woodworking enterprises. It features increased functionality and two protective covers to increase work safety. Works with discs with a diameter of 216 mm, equipped with options such as soft start, speed control, and horizontal movement. A laser is installed to improve accuracy. You can connect a vacuum cleaner to quickly remove dust and chips from the working area.

1600 W electric motor.

Speed ​​adjustment.

Soft start.

Connection for a bag or vacuum cleaner.

CALIBER PTE-1900/255PRm

Saw CALIBR PTE-1900/255PRm with a soft start function is suitable for making precise side, straight, and oblique cuts. The model is equipped with a 1900 W motor, U-shaped special stops, and a clamp for fixing the workpiece. The advantages of the model include replaceable motor brushes, a protective disc guard, and a soft start function. The diameter of the disc is 255 mm, the angle adjustment is possible within 45-90 degrees. There are also options for adjusting the cutting depth and moving in the horizontal plane. To increase accuracy, the model is equipped with a laser.

1900 W motor.

Replacement brushes for engine maintenance.

Angle adjustment up to 90 degrees.

Built-in laser for precise cutting.

ELITECH PT 2030K

The miter saw model ELITECH PT 2030K is equipped with a 2000 W brush-type motor and a 305 mm disc. Suitable for household work and use in small workshops. The angle of inclination of the saw when performing work is 45 degrees, the cutting width is 310 mm, the depth is up to 90 mm. Speed ​​– up to 4800 rpm.

2000 W brushed motor.

Compact dimensions.

Broach for working with large workpieces.

3 Best Cordless Miter Saws

Miter saws equipped with batteries can be used for autonomous operation in environments where there is no mains connection. This is a convenient, mobile, easy-to-use equipment that is in demand during construction, finishing work, and in small workshops.

6 best spacious washing machines and dryers with a load of 7 kg or more

Makita DLS600Z

The Makita DLS600Z cordless console-type model is equipped with a powerful motor and a built-in 18 V battery. The diameter of the working disk is 165 mm, the cutting width is 92 mm, and the depth is 45 mm. Additional features include engine braking and a soft start system. Additionally, there is a bright lamp for illumination on a flexible cable, a dust collector with a bag, and a laser for precise marking.

Autonomous operation thanks to 18 V battery.

Smooth start.

Engine braking function.

Illumination on an adjustable cable.

Laser for precise cutting.

Dust collector for removing chips.

BOSCH GCM 18V-216

The BOSCH GCM 18V-216 saw with a power of 1500 W is equipped with a battery to ensure mobility and autonomous operation if there is no possibility of connecting to the network. The cutting depth, despite the compact dimensions of the equipment, is 70 mm.At the same time, the performance level of the miter saw is not inferior to similar network equipment. The model is distinguished by comfortable work, the presence of a 216 * 30 * 1.7 mm bag for collecting chips and dust, and is equipped with an additional insert plate and a work disk lock.

1500 W motor.

Built-in battery.

Expanded equipment (chip bag, work table clamps, second plate).

DeWALT DCS777N

The DeWALT DCS777N saw with a 1750 W brushless motor is equipped with a lithium-ion battery, which ensures autonomy. The equipment can be used for cutting wooden blanks with a cross-section up to 270*62 mm. To increase accuracy, a positioning system is used, and comfort is ensured by illumination of the work area. To remove dust, a bag is connected, which allows you to remove chips and dust.

1750 W brushless motor.

Connection for a vacuum cleaner or bag.

Positioning system.

Built-in lighting of the working area.

11 Popular Miter Saw Manufacturers

Miter saws are manufactured by many leading equipment manufacturers. Among them are “Caliber”, “Metabo”, “Pulsar”, “Makita” and many others.

• Bison
• TM "Zubr" specializes in the production of inexpensive but high-quality equipment, including miter saws. This is a reliable, durable technology that has excellent functionality and can cope with the most complex tasks. Such saws are used in construction, for workshops, and when performing repair work.
• Metabo
• The German manufacturer Metabo offers universal, practical and easy-to-use miter saws that are in demand in various fields of activity.The equipment ensures reliable fixation of the workpiece and quick completion of work of any complexity. Additionally, saws can be equipped with table extenders to increase the working surface and vertical stops.
• Makita
• The Makita brand (Japan) is well known for its high standards of quality, productivity, and a wide range of manufactured equipment. Makita miter saws are reliable and suitable for performing the most difficult jobs. The manufacturer's assortment includes multifunctional models for the furniture segment, woodworking, and carpentry shops. The equipment has the functions of adjusting the cutting depth, stopping the motor, and protecting against overheating. If necessary, you can additionally connect a vacuum cleaner to collect chips and dust.

The American brand Stanley is known as a designer and manufacturer of high-quality power tools. One of the divisions is the production of miter saws, capable of working at various angles, performing precise cuts and processing of complex workpieces.

• Dewalt
• The English company DeWALT specializes in the production of specialized equipment for the construction and industrial sectors. The miter saws of this brand are powerful, productive, and equipped with such important options as instant engine stop and smooth start.
• Einhell
• The German brand Einhell is known for producing high-precision, productive equipment. The products of this company are distinguished by their reliability, high build quality, and functionality. Einhell miter saws are universal, easy to use, and feature a well-thought-out, ergonomic design.Some models are equipped with bags for collecting chips, laser modules, stops for fixing the workpiece, convenient clamps and a scale.
• Kalibr
• The Russian company "Kalibr" is engaged in the development of professional and household electrical equipment for various purposes. The brand offers a wide range of miter saws, including models with increased power, a reliable power unit that allows you to perform large volumes of work.
• Wortex

The Belarusian brand Wortex specializes in the production of inexpensive and reliable equipment, mainly for household use. The power tools of this manufacturer are distinguished by functionality, interesting, thoughtful design and excellent equipment.

Pulsar

• The Russian company "Pulsar" offers high-quality power tools in demand in industry, construction and for household use. Miter saws of the trade mark have increased working resources, good ergonomics and a wide selection of components. Whirlwind
• The Whirlwind trade mark (Russia) offers a wide range of electrical equipment, including miter saws for woodworking. The distinctive feature of the manufactured equipment is the precision of cutting, high productivity, convenient, simple operation.

Patriot

The American trade mark Patriot is engaged in the development and production of a wide range of power tools. TM miter saws are designed for professionals or amateurs, are distinguished by their productivity, power, and high quality of cutting.

What to consider when choosing a miter saw

A high-quality miter saw should provide an even cut without chips and gaps. Therefore, when choosing, it is recommended to consider the following nuances:Some models are equipped with bags for collecting chips, laser modules, stops for fixing the workpiece, convenient clamps and a scale.

Caliber

The Russian enterprise "Caliber" is engaged in the development of professional and household electrical equipment for various purposes. The brand offers a wide range of miter saws, including models with increased power and a reliable power unit that allows you to perform large volumes of work.

Wortex

The Belarusian brand Wortex specializes in the production of inexpensive and reliable equipment, mainly for domestic use. Power tools from this manufacturer are distinguished by functionality, interesting, thoughtful design and excellent equipment.

Pulsar

The Russian company Pulsar offers high-quality power tools that are in demand in industry, construction and for domestic use. The brand's miter saws have increased working resources, good ergonomics and a wide selection of components.

Vortex

The Vikhr brand (Russia) offers a wide selection of electrical equipment, including miter saws for woodworking. The peculiarities of the produced equipment are cutting accuracy, high productivity, convenient and simple operation.

Patriot

The American brand Patriot develops and produces a wide range of power tools.TM miter saws are designed for professionals or amateurs; they are distinguished by productivity, power, and high quality cuts.

What to consider when choosing a miter saw

A high-quality miter saw should provide an even cut without chips or gaps. Therefore, when choosing, it is recommended to consider the following nuances:

to cut large items and bars, you need to take a saw with a broaching system;

if you plan to work with various materials, it is best to choose a model with adjustable cutting depth;

the presence of laser markings increases the accuracy of the saw;

to perform a longitudinal cut, you should take models with an inclined disk;

To perform cross cuts, it is recommended to consider models with rotary tables.

6 best powerful chainsaws - rating

But these are not all selection criteria. When purchasing a miter saw you should also consider:

features of equipment power supply – from a battery or mains;

equipment power (affects productivity, area of ​​operation);

number of revolutions;

saw blade diameter value;

the value of the depth and width of the cut;

broaching features;

additional features, including functions such as soft start, spindle lock, motor overheat protection, speed and cutting depth adjustment.

Power type

Two options are used to power the electric motor:

with a network connection (usually such models are more powerful and are used for production, furniture workshops);

powered by a rechargeable battery, which ensures autonomy and mobility, the ability to perform work in the absence of a power grid.

From the network

Mains powered equipment has many advantages. This means greater electric motor power, increased productivity, and the ability to perform the most complex tasks. Such miter saws are usually used for professional purposes and are chosen for production. The only downside is the need for an electrical outlet.

Rechargeable

Models with rechargeable batteries refer to mobile equipment that can operate autonomously, that is, without being connected to the mains. To power the motor, batteries are used, the capacity of which depends on the type and power of the saw. The devices are in demand for construction sites, when performing finishing work, in small workshops, where comfort and safety of operation come first, rather than excessively high power.

Power

The power level shows how much work the miter saw can handle. For all categories, this parameter can range from 1000 W to 2000 W, with a higher value indicating that the saw can handle not only wood, but also hard, metal workpieces.The smallest values ​​are for household models, the highest values ​​are for professional miter saws.

• Number of revolutions
• The number of revolutions affects the quality of the cut. The higher this value, the better the quality of the cut you can get. Typically, miter saws use a range of 3200-6000 rpm. But for most models this figure is 4800 rpm, which is enough to work with wood, laminate, plywood and other materials.
• To control the cutting process and improve quality, the speed control function can be used. Typically, more expensive models have this option, which expands the scope of application of the equipment and the use of precise settings.
• Disc diameter
• This indicator affects the depth of cut - the larger the diameter, the larger workpieces can be processed. For household models, the maximum value is 210 mm, but for professional saws this is not enough. In order for the equipment to fulfill its tasks and be able to be used in production conditions or on construction sites, the diameter must be 250-305 mm.

When choosing, you need to take into account exactly what materials and types of workpieces you plan to work with. This saw is purchased for cutting facing boards or plywood; a large diameter blade is simply not needed.

Width and depth of cut

These indicators are used to determine the parameters of the workpiece.The maximum width ranges from 120-340 millimeters, depth - 60-120 millimeters.