Top 21 best wood splitters: from manual to electric, hydraulic and gasoline

Despite the large number of energy sources, the demand for wood remains constant. A wood-burning bathhouse cannot be compared to an electric or gas one, and cooking over an open fire is popular in winter and summer. But first you need to chop the wood. The best wood splitters presented in our rating will help make the process of harvesting them easier and more enjoyable.

The structure of a wood splitter and the principle of its operation

The main task of a wood splitter is to split wood.Success is determined by the trouble-free operation of physical laws. The smaller the area on which the log rests, the greater the effectiveness of the impact or pressure.

Depending on the design, conical, flat or complex-configured knives are used for this. The block is placed on the frame and with force directed towards the knife. Manual wood splitters use muscle power.

A conical knife is made with a bidirectional thread, and a shark fin is welded under the cone, that is, a metal plate that will not allow the log to get stuck on the knife. The log is directed onto the cone with its side. In all other types of wood splitters, a cut of the log is directed onto the knife.

The denser the wood, the greater the force required to split it. One blow with a 2kg hammer may not be enough. For manual cutting of large knotty logs and logs made of dense wood, take a hammer weighing at least 3-4 kg.

The knives of hand-held wood splitters are made of durable steel alloys, but they can also bend if a thick branch rests on the blade. By compaction, the log is turned towards a pusher or hammer so that splitting occurs faster.

6 best manual wood splitters

A manual wood splitter is an outwardly simple tool and works based on the simplest laws of physics. The highlight of the best manual log splitter is its decent appearance, which makes it a pleasure to use.

Kolundrov "X4 Cross"

The effectiveness of a log splitter is determined by its shape and the location of the knives. 4 racks connect 2 rings, which limit the movement of the log and protect against flying chips.The inside diameter of the ring is 200 mm, which allows you to split logs up to 180 mm in diameter.

The steel is covered with an 8-layer anti-corrosion coating. The knives are connected at an angle, which dramatically increases the cutting force of the blow. 4 knives immediately split the log into ready-made logs. There is no need to repeat the operation. For the blow to be effective, the wood splitter is installed on a hard concrete or stone surface.

Intuitive to use.

The firewood does not fly apart and does not cause injuries.

Easy to carry and can be installed directly next to the firebox on a solid foundation.

Takes up little space.

Greenween GW-DR1-T

The basic model of a steel inertial mini-wood splitter is designed for chopping logs with a diameter of no more than 20 cm and a height of up to 35 cm. The tool consists of a flat round support, a limiter, racks, a knife. The upper circular stop holds the log in a vertical position.

The tool works due to a flat knife with a rounded blade. The strength of the steel is reinforced with stiffeners, which facilitate the splitting of wood fibers and prevent the log from getting stuck on the knife.

Stable, there are holes on the support for fixation.

The semicircular edge easily splits wood.

Compact.

Safe.

Kolundrov "X4"

The wood splitter is based on a cross-shaped knife. The log is chopped into 4 parts with one blow. The blades are 5 mm thick. 2 ends of the 4-sided knife are welded to 350 mm high posts. The posts are made of pipes with a diameter of 20 mm and are firmly seated in the nests of the lower ring. A patch with a diameter of 280 mm is enough to accommodate the wood splitter.

The upper ring limits the diameter of the workpiece to 180 mm. The bottom flat ring provides reliable support.All elements are coated with powder enamel to protect against rust, which allows you to use the wood splitter outdoors in any weather.

Compactness and light weight of 6.5 kg.

Safety of the design.

Laconic appearance.

Ready logs in one swing of a sledgehammer.

Durable base.

Greenween GW-DR5-T

A mini-wood splitter with a height of 350 mm and a support diameter of 280 mm easily fits on a wooden block. There are holes in the metal for fixing, self-tapping screws are included. The main element of the tool is a flat knife with welded stiffeners, thanks to which a half-cut log does not get stuck.

The knife is connected to the tube stands with even welds. On one side, the stand has a continuation and ends with a semicircular support-back. Lowering the height of the knife and the back prevent the log from falling. The open blade does not set strict limits for the log size. The length of the workpiece is allowed up to 45 cm, the width up to 40 cm.

Portable size of the wood splitter.

Convenient packaging.

Lightweight, only 4.8 kg.

Wide range of acceptable log sizes.

Kolundrov "Standard"

The wood splitter consists of a design that has become standard for the manufacturer - a flat round base, 2 racks and an upper limiter with a diameter of 200 mm. A knife with transverse membranes is welded to the lower parts of the racks. It is guaranteed to cut the log in half. The limiting ring holds the log. The chopped logs do not fly to the side, but fall down.

Thanks to the modest dimensions of 280x280x350 mm, the wood splitter weighs only 6.5 kg. The steel surface is coated with anti-corrosion powder paint.In order to cut a log with one blow, the tool must stand on a solid, level platform - concrete or, at least, on trampled ground.

Low price.

Low weight.

Sustainability.

Compactness.

Safety.

Kolundrov “With a half ring”

Another representative from “Kolundry” is distinguished by a small supporting semi-ring instead of an upper ring. The increased knife dimensions of 220 mm allow you to chop large logs with a diameter of more than 30 cm. A maximum of 40 cm is allowed.

The steel base has a multi-layer protective coating. For stability, the lower ring can be attached to a wooden block with two self-tapping screws. The height of the knife is lowered towards the stand with a half ring to give the log stability. The dimensions of the wood splitter are 300x300x370 mm, weight 5.23 kg.

Structural strength.

Versatility in relation to workpiece sizes.

Installation mobility.

Light weight.

8 best electric hydraulic log splitters

The built-in hydraulic system significantly complicates the design of the wood splitter and also affects the cost. However, the risk of injury on such a machine is much lower than, for example, on a screw machine. Women and old people can work on it. Another plus is the manufacturability of the unit. It is often equipped with additional functions. Below are wood splitters of various capacities with horizontal and vertical working positions. A prerequisite for trouble-free operation of the wood splitter is monitoring the oil level in the hydraulic system.

Champion LSH5001H

The horizontal wood splitter is supplied with the legs disassembled. For assembly you will need a 13 mm wrench and a 6 mm hexagon socket. Detailed instructions are contained in the accompanying documentation.

The unit weighs 49.8 kg with dimensions 1190x620x1030 and has a place in a garage or covered woodshed. The IP54 rating ensures safe use in dusty and splashing water environments. If the log was lying in the snow, a small amount of water will not harm the equipment.

The noise level of an asynchronous motor with a power of 2.2 kW is up to 80.8 dB. Hydraulic oils are selected in accordance with the recommended list and according to the season. Summer is used at +5 degrees and above. You will need 3.6 liters of oil. The operating cycle time is 10 minutes, of which 4 minutes are spent on splitting and 6 minutes on restoration.

Compact, occupies a small area.

Smooth split without squeezing.

There is a cross-shaped nozzle.

It copes with knotty workpieces without any problems.

Splits large decks.

RedVerg RD-LS 25-37E

The electric wood splitter is designed to be installed on a sturdy table or high, solid base. Its dimensions are 780x270x510 mm. The machine is connected to a home network of 220-230 V. The power of a 1.5-watt motor is enough to create a pressure of 4 tons. The tool cuts logs no more than 37 cm long and up to 25 cm in diameter.

A hydraulic wood splitter will be useful in the country, in a country house, when the volume of workpieces is small. Two-handed operation helps avoid hand injuries. The left hand controls the hydraulics, the right presses the switch button.

Modest dimensions.

There is protection against injury.

Mobile - has wheels, moderate weight.

Patriot CE 3715

A tabletop wood splitter weighing 40 kg is installed on a durable metal or concrete base. The wheels on the body are designed to move short distances on a flat surface. The 1.5 kW motor produces a pusher force of 4 tons.In this case, an oil pressure of 14 MPa is created in the hydraulic system. The amount of oil required is 2.4 liters.

The length of the guides limits the size of the workpiece to 37 cm in length and 25 cm in thickness. Before starting work, loosen the bleed screw. If this is not done, the air, after several periods of compression and expansion, will damage the hydraulic system seals.

Compact.

With protection against accidental activation.

Operated with two hands.

Equipped with wheels for quick movement.

AL-KO LSH 520/5

A wood splitter with a horizontal load splits logs with a force of 5 tons. The 2.2 W motor operates from an alternating current network of 230 V/50 Hz. Installation dimensions of 1235x610x1345 mm will require a small space in any indoor room. The wood splitter is capable of processing workpieces up to 25 cm wide and up to 52 cm long.

To create the necessary pressure, you will need to pour 3.5 liters of oil into the system. IP54 protection allows you to work in open spaces, but it is recommended to protect the equipment from rain. The noise from a loaded engine does not exceed 96 dB.

Two-handed control.

Protective cover included.

Automatic shutdown when overloaded.

Mobile design.

Patriot CE 5215

The horizontal-loading tabletop wood splitter is designed for a maximum length and width of the log of 52 and 25 cm, respectively. The 1.5 kW motor is connected to the home network. The pusher creates a force of 4 tons, which is sufficient for medium-density wood. The pressure in the hydraulic system is 16 MPa. The amount of oil required is 3.5 liters. Control is carried out with both hands. Accidental activation of the hydraulics is prevented thanks to a trigger-type locking device.

Compact and lightweight, 44 kg.

There are wheels.

Equipped with protection against hands entering the work area.

Champion LSV6000

Vertical loading allows you to place logs up to a meter high with a diameter of 13-30 cm on the platform. To speed up work, the height of the splitting ax can be adjusted in 3 modes: 56, 81.5 and 107 cm. When working under maximum load, the wood splitter creates a force of 6 tons and a background noise of 90 dB . The placement requirements are determined by the dimensions 900x1190x1490 mm and weight 97 kg.

A 2.7 W asynchronous motor is installed. The load time to the recovery period of the hydraulic system should be in a ratio of 4:6. Protection class IP54 is designed for small splashes and a small amount of dust in the air, but it is better not to leave the unit in the rain.

Power.

Limited dimensions.

Nozzles included.

Mobile wheels.

Huter HLS-5500H

The floor-standing wood splitter is compact in size and convenient for use. The height of 510 mm allows a person of average build not to lift the log high and at the same time comfortably manage the process. You can chop wood while sitting.

With a length of 680 mm and a width of 340 mm, the unit can be placed in a garage. The periodically generated noise of 80.8 dB is easily tolerated in a closed space. Splitting wood of any density is ensured by a 3.3 kW electric asynchronous motor. The motor is connected to a regular 220 V network.

With IP54 protection, the wood splitter can be used outdoors in winter and summer. Hydraulic oil creates a pressure of 19 MPa in the system, which is equivalent to a pressure of 5.5 tons. For splitting into 4 parts at once, a cross attachment is added to the kit. The maximum parameters of the workpiece should not exceed a length of 52 mm and a diameter of 30 mm.

Limited dimensions.

There are wheels for easy movement.

Powerful, splits the toughest knots.

Reliable protection against accidental switching on, dust and moisture.

Brait BLS525S

The Bright company represents garden equipment produced in Chinese factories. The BLS525S hydraulic horizontal wood splitter model is equipped with two leg options. It can be installed on a table, workbench or floor and can be used while sitting. The high support is designed for standing work. Metal racks are made of profile pipe 25x25 mm.

The metal parts are powder coated in signal red and partly black. The 2.2 kW motor is connected to the 220/50 Hz AC network. Hydraulics create a force similar to the pressure of a weight of 5 tons. The guides allow you to split logs up to 52 cm long and up to 25 cm in diameter. The set includes wheels for quick movement around the site. A simple knife can be strengthened with a cross knife, which is adjustable in height.

Elementary device.

Easy to move.

Protection from injury.

Cross nozzle included.

4 best gasoline log splitters

The main advantage of gasoline-powered equipment is that it is not tied to a specific location. It can be used near a summer cottage or directly in the forest, where timber is being harvested for firewood.

NMZ SDK-1

The compact equipment from the Nylga Mechanical Plant is equipped with a 5.12 W Carver engine. The fuel tank holds 3.6 liters of gasoline. The working position of the screw wood splitter is vertical. Total weight 61 kg. A belt drive is used to transmit the rotational force of the engine to the propeller. The gear ratio of the power unit/spindle is 2 to 5.

If there are large knots on the log, make sure they are directed away from the screw. Otherwise the shaft may jam.

The wood splitter processes logs of any size that can fit on a table measuring 600x450. If you plan to split large logs, a car wheel is installed on the hub. The wheel creates an inertial rotation effect, which removes excess load from the engine. The overall dimensions of the equipment are 960x630x490 mm.

Easy to use.

Engine power.

Good metal.

Belmash LSG-500 S115A

A semi-professional rack-and-pinion wood splitter from a Russian-Belarusian manufacturer develops a splitting force of up to 20 tons. A 4-stroke engine with a power of 4.8 kW is installed. The frame allows you to load logs up to 50.5 cm long and up to 40 cm in diameter. Using a wood splitter, you can prepare 4 cubic meters of firewood in an hour.

Maximum noise level at load 90 dB. For the machine you will need a place with an even, dense coating according to dimensions (LxWxH) 1760x670x1115 mm, which will support a weight of 133 kg. Use requires two-handed operation. You need to press the panel under the handle and pull the lever.

Blocking accidental activation.

Powerful splitting force.

Constant management.

Automatic shutdown when the engine overheats.

Wheels for mobility.

Texas 600VG

A wood splitter from Danish engineers successfully splits wood of any species with a force of 6 tons. Equipment with vertical loading and dimensions 540x710x1090 mm weighs 112 kg. For easy movement, the base has 2 wheels. 2 metal casings protect against scattering of chips.

The hydraulic power system requires 8 liters of oil. The fuel tank capacity of a 4-stroke single-cylinder engine with a power of 3.6 kW is 3.6 l. The cycle of splitting and return movement of the cleaver takes 12 s.The size of the workpiece is limited only by the parameters of the loading platform and the height of the splitting stand, which can accommodate a log up to 105 cm long. To start, you must manually turn on the starter.

Minimum dimensions.

Protection against hands getting into the machine.

Economical fuel consumption.

Reliability of the design.

Dormac RL 12H

The universal wood splitter is used in vertical and horizontal working position. Using a hydraulic system, it develops a force of up to 10 tons, which helps cope with the density of any type of wood and strong knots. A 4-stroke Honda engine with a power of 3.4 kW is installed. The height of the workpiece is limited to 52 cm. As for the width, the technique can cut a log with a diameter of up to 70 cm.

The set includes a 4-sided knife and wheels. The weight of the wood splitter is 172 kg. The operation uses two-handed control. The productivity allows the equipment to be used for large-scale procurement of firewood for both personal and commercial purposes.

Versatility of working position.

Safety of use.

Great performance.

Independence from the place of work.

Easy to move wheels.

Top 3 wood chippers

Planing wood chips is sometimes no easier than cutting wood. The Kolundrov company has taken care of safe tools for this. The operating principle is based on the principle of increasing force by increasing the length of the lever.

Kolundrov “Standard”

The chipper is attached to a wall or other strong vertical base in such a way that it is convenient to use your body weight in the work. For average height it is 110 or 120 cm. The log is placed on the tooth of the frame and cut with a knife with a long blade. There is no point in trying to cut thick logs. The maximum thickness of chips should not exceed 4-10 mm.

At one end the blade is connected to the frame. The connecting wings can be easily unscrewed if you need to chop branches or sharpen the blade. The handle on the other end of the knife is firmly fitted and made of non-slip material. If you combine the blade and the frame, you can block access to use with a padlock through a common hole.

Easy to use.

Durable steel.

Access protection.

Comfortable handle.

Kolundrov "Economy"

The wood chipper frame is a steel profile pipe with dimensions of 40x20 mm, to which support steps for the log are welded. Depending on the size, the workpiece is placed so that the angle of the blade with the frame is no more than 90 degrees. The allowed log length is 25-40 cm.

Together with a knife with a width of 40 mm and a blade thickness of 4 mm, the tool weighs 2.55 kg. In damp weather, in an open place, the chips should be covered with a cover, and during long periods of inactivity, put away in a dry place. The junction of the lever and the frame is lubricated with lubricating oil to prevent rough movement.

Inexpensive.

Functional.

Elementary design.

Neat appearance.

Kolundrov "Premium"

An original looking wood chip with a wooden oak handle will come in handy when lighting a fire, stove, or will make an impressive gift. The peculiar decoration with openwork cutouts in the wall mounts and in the blade, painting on the frame makes the chipper not just a tool, but also a decoration for the bathhouse and barbecue area. Dimensions are 290x600x130 mm, and weight is 5.25 kg.

4 ledges of a fixed base are designed for log lengths from 25 to 40 cm. The wood chipper copes with a wood width from the edge of up to 10 mm. It must be taken into account that knotty logs, logs with a compacted structure, and boards with nails can damage the blade.

Stylish appearance.

Access protection.

Durability.

Ergonomic handle.

6 popular manufacturers of wood splitters

Large and small companies are engaged in the production of wood splitters. The 6 brands presented have gained popularity due to a wide service network, regular supply of spare parts and ergonomics of the equipment.

Champion

Champion has been developing the Russian market since 2005 together with the American company Briggs & Station. For the assembly of various equipment for home and garden, components are supplied from Europe, Asia. Production facilities are located in China.

The design and ergonomic characteristics are developed specifically for the Russian buyer and the harsh weather conditions of the country. The brand is known for high-quality equipment. The company does not leave the consumer to the mercy of fate, takes care of the availability of spare parts, consumables and provides service throughout the country. 6 best capacious washing machines with dryers with a load of 7 kg

Champion specializes in electric wood splitters with hydraulic force. For domestic purposes, horizontal models for 5 tons with a log size of up to 25 cm in thickness and up to 52 cm in length are produced. Semi-professional vertical wood splitters have increased pressure of 6 tons for logs up to a meter in length and up to 30 cm in width.

Huter

The history of the company dates back to 1979. Thanks to strict adherence to standards, quality of materials, products for home and garden have gained wide recognition. Russian buyers have had the opportunity to buy Huter tools since 2004.

Along with welding machines, snow blowers, electric generators and other equipment, the company produces floor and table hydraulic wood splitters.German engineers take into account the requirements for safety and compactness of equipment. Moderately priced units are equipped with powerful engines that allow you to prepare firewood for the entire season in a short time.

The use and maintenance of equipment does not require special skills, and the consumption of materials is economical, as provided by the best German traditions. Performance characteristics are maintained for many years, subject to compliance with the rules of use and safety precautions.

Kolundrov

The Russian company specializes in equipment for country houses and outdoor recreation. Products of the Kolundrov brand have been produced since 2016 based on our own basic designs. Over the course of 5 years, the company has received 18 patents and produces products that have earned recognition for their affordable cost and ease of use.

Accessories for fireplaces, stoves, wood splitters and wood chippers are distinguished by their practicality and stylish design. Gift products with elements of artistic forging are deservedly in demand among all segments of the population. The original wood splitters turn routine hard work into fun.

Wood splitters are made of high-quality steel, but you should still avoid storing the tool in damp conditions. The manufacturer recommends lubricating the blade with grease or oil before long periods of inactivity.

GreenWeen

The St. Petersburg company has been producing furniture and other goods for home and country life since 2015. The catalog contains several hundred items. Among the assortment there are the simplest manual wood splitters, the task of which is to turn hard work into easy physical exercise. The products are manufactured using our own patented technology.

The easy-to-use tool is attractive due to its low cost and small size. The structures are made of steel and covered with protective paint that is resistant to mechanical stress. GreenWin wood splitters are distinguished by a unique packaging case. The product is supplied in a tube made of laminated cardboard, reinforced with an aluminum edge. In this form, the wood splitter is convenient to give as a gift.

Al-Ko

The German company was founded in 1931. Over almost a century of history, a small metalworking workshop has turned into the production of gardening and forestry equipment. Al-Ko Kober Group also supplies industrial air conditioning systems and components for the European automotive industry. The name Al-Ko was given to the company in honor of its founder Alois Kober.

A wide range of garden tools includes everything you need to care for your garden, from pruning shears to automatically controlled equipment and robotic lawn mowers. The company's product range includes several types of vertical and horizontal wood splitters with a pressure force of 5 to 8 tons.

Patriot

Founded in 1973 in the USA, the repair shop is now a large company that supplies a wide range of home and garden care products. The range includes climate control equipment, hand tools, gardening and construction equipment. In 1999, the rights to the brand were purchased by Russian owners. The company cooperates with the Ministry of Defense of the Russian Federation and supplies snow removal and gardening equipment.

Patriot produces inexpensive but reliable electric log splitters using a hydraulic system. The units are connected to a 220 V home network.An average pressure force of 4-5 tons ensures rapid splitting of deciduous and coniferous wood.

Types of wood splitters

The equipment, depending on the type, is driven by muscular force or by engine traction.

Manual

The design is based on the application of physical laws that increase the applied force several times.

Crowbar cleaver

It is a pipe through which a sharp metal rod moves. The upper end of the rod is attached to two handles. The cleaver is installed on a block of wood. The crowbar is lifted by the handle and dropped with force. A crowbar is convenient for breaking large logs that do not fit into a mechanical wood splitter.

Spring

The mechanism consists of a frame, a stand and a lever with a cleaver at the end. The connection between the frame and the lever is movable. The spring holds the cleaver and ensures its free movement to a certain height. The cleaver is pulled back and released.

Inertial

The impact of the cleaver increases the acceleration of free fall, so the heavier the cleaver, the faster it accelerates. The design consists of a metal vertical pin or pipe with thick walls. The cleaver is fixed to a frame, which, in turn, is fixed to the pipe with rings or a larger diameter tube. The diameter should ensure free movement of the cleaver, but not allow lateral vibration. The cleaver is lifted by the frame and sharply lowered onto the log.

Mechanical

According to the type of drive, wood splitters are divided into:

• electrical;
• gasoline or diesel fuel;
• on tractor traction, that is, connected to the engine or hydraulic system of the tractor.

Further transfer of pressure to the workpiece differs fundamentally depending on the type of device.

Screw or cone

A wood splitter with a cone-shaped ax is effective and valued for its reliability and ease of repair. The cone has a transverse thread, which facilitates the separation of wood fibers. The reverse function helps to free yourself from a stuck workpiece.

Hydraulic

A wood splitter is used to create force by converting the potential energy of a liquid into kinetic energy. Hydraulics are quite expensive, but in terms of quality and splitting speed they are ahead of other types of equipment. The circuit includes a gasoline or electric engine. A flat knife or a cross-shaped one can be used.

Geared

The device of a geared wood splitter is based on the conversion of torque into the translational motion of a crank mechanism. The connecting rod moves along a guide on the frame and pushes the log towards a permanently installed knife.

Rack and pinion

The wood splitter is characterized by a simple mechanism and high speed of operation. The pusher moves using a metal rack coupled to a gear through a gear train. The return of the pusher is ensured by a return spring. The splitting knife can be flat-cut or cross-shaped to divide the lump into 4 parts at once. The wood splitter operates from any source that transmits torque.

What characteristics to look for when choosing

Technical characteristics determine not only the cost of the equipment, but also ease of use. High-performance models at home are unprofitable.

Working position

According to the location of the working surfaces of the installation, there are:

1. Vertical, which are considered the most compact and powerful. They are used mainly for industrial purposes.Despite their compactness, they are heavy, but they have the highest productivity. Allows you to separate long logs.
2. Horizontal, which are distinguished by a more bulky design, reduced productivity and limited maximum log length. However, compared to vertical wood splitters, they are lighter and safer, which is why household equipment is usually horizontal.
3. Universal, in which the position changes depending on working conditions and raw materials. They are characterized by heavy weight and high cost.

An effort

For household wood splitters, a force of 4 to 6 tons is sufficient. Installations of higher power are used only on an industrial scale. It is not safe to use them at home.

Workpiece dimensions

The parameter is influenced by the piston stroke reserve in hydraulic models, the length of the rack in rack and pinion devices, or the table area for screw ones. The power of the force generated by the machine plays an important role.

The standard length of the workpiece for a horizontal wood splitter is limited to 52 cm, for a vertical one - about a meter. Screw log splitters can process logs up to 70 cm long and any log thickness that can fit on the workbench. The limitation in this case is dictated only by safety.

The diameter of the block for hydraulics and rack and pinion mechanism depends on the specific model. In mini versions it is 25 cm, but most mechanical splitting splitters are capable of splitting logs up to 50 cm thick.

Additional functions

In addition to the basic equipment, for convenience and increased productivity, wood splitters can be equipped with:

• wheels;
• pusher movement limiters;
• a cross-shaped knife for dividing the deck into 4 parts;
• loop for coupling with equipment for transportation.

How to choose a wood splitter for your home and garden

The scheme for choosing a home tool consists of several stages:

1. First of all, it is determined how much fuel will be needed for the season. If the house has stove heating, then you need to heat the rooms and also provide a reserve for a bath or sauna, and also take into account cooking in the summer kitchen or on the grill. The more requests, the more powerful the aggregate should be.
2. If you plan to bring in logs and chop them in the yard or garage, a model with an electric motor will be more appropriate. Hydraulic equipment is suitable for people with limited mobility. For strong men, you can save money on a wood splitter and purchase a screw or manual wood splitter. A gasoline wood splitter is not very environmentally friendly, but it is indispensable for working outdoors.
3. It is more profitable to buy equipment from a well-known manufacturer. It's not just about quality and guarantees. Large manufacturers are opening a network of service centers. There will be somewhere to turn in case of breakdown or wear of parts.
4. Additional equipment often solves many problems in handling equipment. For example, limiting the pusher stroke allows you to save time and costs when the logs are cut short. Wheels, especially on heavy equipment, will help move the wood splitter.

For a healthy person, swinging an ax a little does not mean working hard. When we are talking about a firewood machine, and a person is not physically prepared, one inevitably has to think about a mechanical assistant. We hope our review will help you make your choice.