Tips

The best heating radiators for an apartment and a private house - TOP-35 rating

Global STYLE PLUS 350

STOUT Space Ventil 500

STI Bimetal 500/80

Rifar SUPReMO Ventil 350

5 best aluminum radiators

Oasis Al 350/80

Global VOX EXTRA 500

KONNER LUX 200

STOUT Alpha 500

Solur PREMIUM

5 best cast iron radiators

Konner Modern 500

Konner Legenda 600

Exemet Romantica 350

STI Nova 500

RETROstyle WINDSOR 500

5 best steel heating radiators

LEMAX type 22 500*400

Prado Classic 11 500

ROMMER Ventil 11 300

Kermi FKO 33 300

Buderus Logatrend VK-Profil 11 300

5 best panel heating radiators

Royal Thermo Ventil Compact VC22-300

Buderus Logatrend VK-Profil 21 300

Kermi FTV(FKV) 33,600

ROMMER Ventil 22 300

Electrolux Ventil Compact VC22-500

5 best tubular heating radiators

WH Steel P 270 V

KZTO RS 2-500

KZTO Harmony 1-1750

Zehnder Charleston 3057 566

Arbonia 2057

5 best monolith heating radiators

Rifar SUPReMO 500

Rifar Monolit 500

Irsap Tesi 21800

BIPRICOT 500/80

Anit Pioneer Gold 1200×500

12 popular manufacturers of heating radiators

Rifar

Royal Thermo

Kermi

Oasis

Lemax

Prado

Global

Rommer

Buderus

Stout

Conner

Heating radiator calculation

What to look for when choosing a heating radiator

Radiator type

Sectional

Monolithic

Tubular

Panel

type of instalation

Floor

Wall-mounted

Universal

Vertical design

Connection type

Lateral

Lower

Universal

Radiator and gasket material

Heat dissipation

Pressure

Dimensions for installation

Life time

Design Features

Show in full ▼

5 best bimetallic heating radiators

Bimetallic radiators are made internally of steel and externally covered with aluminum fins. Such products are created by combining two metals in one device. High-quality bimetallic models must be coated with an anti-corrosion coating inside and outside. They can withstand pressure of 20-35 atmospheres and do not require special technical conditions for circulating water.

KONNER 80/350 Bimetal

The bimetallic radiator of this model is made of high-quality steel and aluminum. The strength of the products is combined with good thermal parameters. To achieve good room heating results, the design is based on a steel frame, which provides good resistance to pressure and oxidation.

Externally, the model is made of aluminum fins. This metal was selected for its thermal characteristics. Low inertia allows you to quickly respond to changes in the temperature of the product, heating the room in a short time.

Strength.

Good thermal performance.

Possibility of using antifreeze.

Global STYLE PLUS 350

The internal part of the radiator in contact with water is made of steel. The outer part is made of aluminum, which guarantees maximum heat transfer. The product has a pressure of up to 35 atmospheres. Silicone gaskets between sections make the heater reliable.

The model can be installed in rooms with a central or autonomous heating system. The heat output is 852 W. Thanks to its design, the radiator has low inertia and is easy to adjust and control to the required temperature. To quickly install the product, the kit includes all the necessary accessories that allow you to achieve the required tightness of connections when installing the heating system.

High heat dissipation.

Has a large margin of safety.

Certified quality.

STOUT Space Ventil 500

Models of bimetallic radiators are assembled at the factory under special conditions. Each section has a steel vertical manifold with an internal diameter of 12.6 mm. Steel nipples and gaskets ensure reliable sealing of the assembled radiator.

The maximum carrier temperature is up to 135 degrees, and the operating excess pressure reaches 2 MPa. The product meets the requirements of GOST of Russia. The service life, subject to all requirements of the technical passport and during maintenance work, will be 25 years.

Compliance with all standards.

Increased reliability of the radiator assembly.

25 year warranty.

High heat dissipation.

STI Bimetal 500/80

The radiator of this model is suitable for heating residential, public and commercial premises. It can be used not only for independent heating systems, but also for a central system. The high heat transfer of the sections allows the product to be used in low-temperature systems.

Low inertia guarantees effective thermal regulation, which creates maximum comfort. Working pressure reaches 24 bar. The temperature of the working environment reaches +110 degrees. Not only water, but also non-freezing liquids can be used as a coolant.

Installation in any heating systems is allowed.

Protective covering.

Bimetallic housing.

Multiple leak checks.

High quality casting.

Bimetallic radiator from a domestic manufacturer with non-separable sections, a solid steel core and a bottom connection type. Such products have a small height (42.5 cm) and can be installed in rooms with low window openings, in utility rooms and glazed balconies.

Monolithic batteries from this manufacturer are reliable, have high heat transfer, and are durable. This model will fit into any interior, as it has a fashionable design. Water, oil or antifreeze can be used as a coolant. The maximum operating pressure reaches 3 MPa, the operating temperature is 135 degrees.

Low height.

Trauma-proof form.

Wide range of thermal power.

Good performance characteristics.

5 best aluminum radiators

Such heating devices are widely used for heating systems of private houses. The popularity is explained by its modern design and increased thermal power. The cost of such products is extensive, it all depends on the manufacturer. If the operating instructions are followed, these batteries will last a long time.

Oasis Al 350/80

An aluminum radiator has high thermal conductivity and is able to heat a room in a matter of minutes.Thanks to the material used, the product is resistant to corrosion. The model is suitable for installation in any room. Sleek, lightweight and compact, the heating device does not require painting.

• Each section is produced using the most modern method – injection molding. All stages of production undergo quality control, so the products can be used for many years. The operating pressure is maintained at 16 bar, the thermal power is 808 W.
• Sleek and compact design.
• High heat dissipation.

Quality control.

Increased corrosion resistance.

Global VOX EXTRA 500

Aluminum radiators from this manufacturer make it possible to quickly regulate the temperature in any room with ease. A model with smooth, even and clear shapes. Devices of this model can be installed in heating systems with high and low coolant temperatures. They can be used in systems with hot water and steam up to 110 degrees.

6 best professional chainsaws - rating

Operating pressure 16 bar. The heat output reaches 1850 W. Thanks to the quality of the material, the radiator is reliable and durable in use. Painting of the battery is carried out in 2 stages: the anaphoresis method (immersion in a bath) and subsequent spraying of epoxy paint.

Reinforced design.

Two-stage painting.

The radiator production technology is injection molding.

Work at low temperatures.

KONNER LUX 200

The model is characterized by high heat transfer due to the fact that the material is thicker in comparison with similar products. The radiator is easy to use and has unsurpassed reliability. Compact dimensions fit well under panoramic windows. Designed specifically for use in Russian conditions.

The product meets the requirements of GOST and is manufactured according to international quality standards. The heat output is 960 W. The center distance is 20 cm. Cast aluminum radiators are produced by injection molding.

Production by casting method.

Thicker side ribs.

High heat dissipation.

Light weight and elegant appearance.

STOUT Alpha 500

An aluminum radiator is capable of heating a room with an area of ​​18 square meters, depending on the number of sections. The fewer there are, the smaller the heated area. In the manufacture of the product, injection molding technology is used. The heat output reaches 1690 W. The internal volume of the section is 0.33 l.

The working pressure is 16 MPa. The maximum media temperature reaches 110 degrees. The radiator is manufactured in accordance with all quality standards. With proper use it will last for many years.

Manufactured by injection molding.

Good heat dissipation.

Quality product.

Solur PREMIUM

The company produces full-weight radiators using injection molding. The increased circular section of the section channel makes the product durable and efficient. The Italian “pressed bottom” technology was used in production. A special heat-resistant graphite gasket is also used between sections. This provides a reliable and rigid layout.

The center distance is 50 cm. The operating pressure reaches 27 MPa. Many parameters depend on the number of sections. With 6 sections, the heat transfer will reach 1083 W.

Italian technology “pressed bottom”.

Radiator production is under full Italian control.

High heat dissipation.

Thoughtful design.

5 best cast iron radiators

Cast iron batteries first appeared more than 100 years ago. Even now, in old houses you can still find cast iron radiators with an operating experience of 50 years. This means that they are reliable and durable. If aluminum products quickly heat up and cool down, then cast iron products, on the contrary, take a long time to heat up and cool down for a long time. Corrosion resistance is quite high. If there are doubts about their appearance, then the modern market offers exquisite decorative solutions that can decorate any interior. The only drawback of such radiators is their heavy weight.

Konner Modern 500

The cast iron radiator of this brand is a practical and reliable device for heating rooms. It is equipped with increased corrosion resistance. Any coolant can be used in the product. Batteries from this company can be installed in systems with natural circulation.

The model was created taking into account use in Russian conditions and has high strength parameters. The products of this company undergo quality tests. Thanks to this quality control system, radiators occupy a leading position in the Russian market.

Durable.

Corrosion resistance.

Can be installed in systems with natural circulation.

Modern design.

Konner Legenda 600

The heating device is made for lovers of retro style. Remarkable and different patterns on the radiator columns and decorative “ears” add sophistication to the interior. The model is made of cast iron, which ensures a long period of use due to its high reliability. The service life of cast iron radiators reaches 50 years.

The center distance in this model is 60 cm. The heater has a height of 778 mm and stands on cast iron legs.It is worth noting that this Legend model is supplied in 3 or 10 sections. For 10 sections, the working pressure reaches 1.2 MPa. The heat flux is 180 W.

Production according to international quality standards.

Durability and corrosion resistance.

Immunity to poor quality coolant.

Retro style design.

Exemet Romantica 350

The floor-mounted cast iron radiator is a designer model and will appeal to fans of antique style. The product is made with elegant patterns of the last century. The device can withstand high pressure, is resistant to corrosion and can be used in systems with both forced and natural circulation.

Water or glycerin can be used as a coolant. The coolant temperature reaches 110 degrees. Maximum pressure 10 atm. Center distance 35 cm.

Exquisite retro design.

Durability.

Withstands high pressure.

STI Nova 500

The cast iron radiator is designed in accordance with GOST specifically for use in Russia and is fully adapted to Russian conditions. The model is equipped with all the advantages of traditional cast iron batteries - the product is not subject to corrosion and can be installed in any heating system without any special restrictions.

Only modern equipment is used in the production of radiators. The model is wall-mounted with a height of 58 cm. The center distance is 50 cm. The maximum operating temperature is 130 degrees. After assembly, the company carries out mandatory high pressure leak testing, which guarantees high quality.

Service life up to 50 years.

Does not corrode.

Installation on any heating systems.

High quality and compliance with GOST.

RETROstyle WINDSOR 500

Cast iron radiators of this model are suitable for those who want to recreate a unique interior design. Such retro models are valued for their aristocratic appearance. The product combines ideal proportions, a beautiful pattern, and restrained strict forms. The model fits well into a classic style interior.

6 best semi-professional chainsaws - rating

Radiators of this model are produced using the traditional method of casting gray cast iron. This ensures a long service life for cast iron batteries. Water is used as a coolant. The maximum temperature reaches 110 degrees.

Beautiful retro design.

High quality.

Durability.

Ideal proportions.

5 best steel heating radiators

Steel radiators have good heat transfer characteristics. The models are compact and fit well into the interior. Considering the type of design, there is a choice of different methods of connecting to the heating system of the house.

LEMAX type 22 500*400

Universal steel radiator with side connection. Recommended for any type of premises. Suitable for residential, office and administrative buildings. Such models are in demand and popular because they are universal. The product consists of two steel panels, two built-in convectors, and an air outlet grille.

The model is characterized by high heat transfer and low inertia; it heats up quickly and cools down just as quickly. The maximum operating pressure is 0.9 MPa, and the maximum coolant temperature reaches 120 degrees. The side connection promotes uniform heating in the upper and lower parts.

Universal model.

High heat transfer and low inertia.

Reliable side connection.

Prado Classic 11 500

The steel radiator of this model is insensitive to fluctuations in coolant pH, which makes this its main advantage over aluminum products. Light weight makes it possible to install the radiator even on drywall. The maximum operating overpressure reaches 0.9 MPa. Maximum temperature – 120 degrees.

Versatility of the model.

There is no sensitivity to fluctuations in coolant pH.

Light weight.

ROMMER Ventil 11 300

The steel radiator of this model is designed for heating systems with pressure up to 9 atm. The liquid for the system can be water and antifreeze liquid. The product meets the requirements of the European standard. Spot welding of butt seams makes it possible to guarantee a high degree of heat transfer.

The product panel is made of 1.2mm low-carbon steel. The top cover can be removed, which makes it easy to clean it from dust and dirt. The height of the product is 30 cm. It undergoes multi-stage quality control. Guaranteed service life 25 years.

A paint coating that does not yellow throughout its entire service life.

Removing the top cover.

Multi-stage quality control.

High level of heat transfer.

Kermi FKO 33 300

The panel radiator is made of steel and has three heating panels through which coolant and three convection elements circulate. Due to its small size, the product has a depth of only 10 cm, which makes it possible to install the heating device in buildings where a minimum distance from the wall is required.

The radiator has a two-layer anti-corrosion coating. When painting the surface of the product, do not use compositions that contain formaldehyde resins and heavy metals.Therefore, such a device will not harm the health of the consumer. Working pressure reaches up to 8.7 atm. The maximum media temperature is 110 degrees.

Durability.

Double powder paint coating.

Improved options.

Small sizes.

Buderus Logatrend VK-Profil 11 300

The radiator is designed in compact dimensions. Safety edges allow the heating device of this model to be used in medical and children's institutions. The product is equipped with an innovative thermostatic valve that saves energy 5% better than others.

The steel radiator has increased heat transfer. On top it is covered with an environmentally friendly paint coating. The depth of the model is only 6.5 cm. The operating temperature reaches 120 degrees.

Reliable radiator.

Safe paint coating.

Compliance with quality standards.

High heat dissipation.

5 best panel heating radiators

Panel radiators belong to the convective type of heaters. Heating occurs by moving air around the room. Such products are also called convectors. To enhance convection, both single-panel and two- and three-panel products are produced. Due to their design, such devices have low inertia - they quickly heat up and cool down.

Royal Thermo Ventil Compact VC22-300

The panel heater from this manufacturer is made of 1.2 mm steel. It is equipped with a built-in thermostatic valve from the leading control equipment manufacturer Danfoss. This allows you to regulate the indoor climate without loss of heat transfer.

The maximum pressure of a panel radiator reaches 10 Bar. The top of the product is painted with preliminary preparation, surface treatment and the application of clean enamel.This coloring guarantees resistance to external influences and ensures the durability of the coating.

Full set.

Super durable 5-step coloring.

Possibility of painting in any color from the palette.

Mandatory certification.

Buderus Logatrend VK-Profil 21 300

A radiator with a bottom connection can be easily installed in any room. It is well suited for both new heating systems and when replacing outdated batteries. This model consists of two heating panels and one convector.

The mounting design is wall-mounted, height 30 cm. This will allow the radiator to be installed in houses with low window openings. The permissible pressure of the heating device is 10 bar. The maximum coolant temperature reaches 120 degrees. The safe edges of the batteries allow it to be installed in children's institutions.

Safe paint coating.

Radiator reliability.

Small sizes.

High heat dissipation.

Kermi FTV(FKV) 33,600

The radiator has low thermal inertia and good heat dissipation. This makes it possible to effectively install it in current heating systems, where the permissible pressure is not higher than 10 bar. Radiator height 60 cm.

High quality steel.

Good heat dissipation.

Built-in thermo-mixing valve.

Certification in accordance with GOST.

ROMMER Ventil 22 300

The panel radiator is intended for closed heating systems. The coolant can be water and non-freezing liquid.The top cover of the device can be easily removed, allowing it to be cleaned. Painting is carried out in several stages with high-quality paint.

8 best chainsaws for home in terms of price and quality - rating

The radiator is made of cold-rolled steel. Wall thickness 1.2 mm. Quality checks at all stages of creation guarantee the reliability of heating devices. The height of the radiator is only 30 cm.

Coolant efficiency.

Low cost.

Long service life.

Side and bottom connections.

Painting according to RAL.

Electrolux Ventil Compact VC22-500

The panel type model with bottom connection is equipped with a built-in thermostatic valve. Such a heating device is well suited for heating systems with pipes in the floor, guaranteeing correct microclimate regulation without loss of heat transfer.

Thanks to special fastenings and the absence of installation brackets on the back of the device, it can be connected to the heating system on both sides. The model is made of steel. This guarantees additional reliability.

Reliable heating device.

Super durable 5-step paint job.

Universal left and right connection.

High quality.

5 best tubular heating radiators

Tubular radiators are heating devices that are made of steel and whose construction uses pipes. They can be of different shapes (straight, curved, wavy), and can have different cross-sections (round, square, oval). The technical parameters of such devices make them comfortable for use in private homes.

WH Steel P 270 V

The radiators of this model are made of steel. Thanks to their modern design, they are suitable for all modern interiors.Products can be made in the form of a partition, railing, bench. The model is distinguished by its lightness and grace.

The radiator can be supplied in any color in accordance with the RAL scale. Working pressure is 16 atm. Can be installed both on the wall and on the floor. The model can withstand high pressure and is not susceptible to coolant due to the wall thickness.

Uniform heating and excellent heat dissipation.

Wear-resistant and durable radiators.

Modern design.

Double safety margin.

KZTO RS 2-500

The steel radiator of tubular design is highly durable in use. Can be installed in systems with steel, metal-plastic, copper pipes in single-pipe and two-pipe heating systems.

Such radiators are recommended for use in multi-storey premises, as well as buildings with increased requirements - children's and medical institutions. The maximum temperature of the coolant reaches 120 degrees. The manufacturer promises a service life of 25 years.

High reliability.

Many installation options.

Easy to clean from dust and dirt.

Powder coating.

KZTO Harmony 1-1750

The heating device is considered the embodiment of unique engineering ideas. The product section is a coaxial pipe (pipe in pipe). Thanks to this, heat transfer increases several times. The “Harmony” series received this name for its harmonious addition and decoration of heated rooms.

For the manufacture of the radiator of this model, high-quality steel is used, which is not subject to corrosion. This guarantees high resistance to mechanical influence. Side connection type. Maximum operating pressure 15.19 bar.The coolant temperature can reach 120 degrees.

Use of high quality steel in production.

Increased wall thickness.

The body is coated with polymer.

Ability to work in one-pipe and two-pipe heating systems.

Zehnder Charleston 3057 566

Radiators from this manufacturer undergo joint processing using laser welding. This makes the seams almost invisible. Each product consists of durable pipes and special manifolds.

The radiator is suitable for all closed heating systems. The maximum operating temperature of the coolant reaches 110 degrees. Maximum operating pressure – 10 bar. The height of tubular models can be different, from miniature to high on the entire wall. The device is equipped with a built-in thermal valve.

Invisible seams.

1. Built-in thermal valve for pressure regulation.
2. High heat dissipation.
3. Arbonia 2057
4. The model of this radiator has the smallest depth - only 6.5 cm, this allows you to save space in the room. The product has good heat dissipation. The pipes are connected to the device from the side. It is made without sharp corners, which makes it injury-proof.
5. The coolant pressure in the system should not exceed 10 atm. The radiator has a columnar structure, which consists of two tubes in a section profile. This model is an ideal option for replacing old cast iron and steel batteries.
6. Thin radiator with shallow depth.

Built-in thermostatic valve.

5 best monolith heating radiators

Monolith radiators are new, patented heating devices with particularly high technical parameters that meet the most severe conditions of use.Such products are reliable and have high heat transfer, achieved thanks to the developed geometry of heat transfer surfaces made of aluminum alloy.

Rifar SUPReMO 500

The design of the radiator is a non-separable monolithic one made of steel pipes with a wall thickness similar to that of water pipes. There are no areas in the device that could be dangerous for leaks. A two-pipe vertical channel makes it possible to improve coolant circulation and increase heat transfer efficiency.

When manufacturing radiators, the company uses steel pipes of its own production from high-quality structural steel. This guarantees high corrosion resistance. The product is suitable for any type of connection. This model is presented with a center distance of 500 mm. The maximum operating temperature reaches 135 degrees. Working pressure 30 bar.

High reliability.

Modern and harmonious design.

Practical and easy to clean.

High corrosion resistance.

Rifar Monolit 500

Radiators of this model are created using unique technology. The main characteristic feature is their versatility. They can be connected and used in any heating system (from modern to Soviet).

Such radiators are not divided into sections. The heating device completely eliminates leaks. The model can withstand pressure up to 100 atmospheres. The device is highly resistant to corrosion. Easy to install, since the model does not provide for the installation of adapters.

No leaks.

Durability of use.

High resistance to corrosion.

High structural strength.

Ease of installation.

Irsap Tesi 21800

The model is a steel sectional radiator.The sections are made using laser welding, thanks to which they have a smooth surface at the welding points.

6 best powerful chainsaws - rating

High heat transfer, large volume of coolant and large radiating surface - all these are parameters that ideally characterize this model. For the manufacture of one section, sheet steel pipes with a diameter of 25 mm are used. Maximum operating pressure 10 bar. The maximum coolant temperature reaches 95 degrees.

Thoughtful design.

Manufactured from durable steel.

Made using laser bond.

Good heat dissipation.

Compact sizes.

BIPRICOT 500/80

In the radiators of this model, the section is made of a steel vertical and horizontal collector. The design completely eliminates contact of the coolant with the aluminum body. The combination of an aluminum body and a steel core allows the radiator to be strong and durable.

Vertical and horizontal radiator fins improve air passage, which improves heat transfer. The model is suitable for all types of heating systems. The design can withstand high pressure.

Aesthetic design.

Sturdy and durable model.

Withstands high system pressure.

Resistant to corrosion.

Anit Pioneer Gold 1200×500

A radiator from this manufacturer is capable of heating a room quickly. The model heats up evenly, using a minimum amount of water. The design of the device has a tubular shape with micro fins, which helps generate greater thermal power.

The heater is highly resistant to overpressure up to 120 bar.The radiator wall, which is in contact with the coolant, is coated with epoxy resin. This makes it possible to avoid malfunctions and extend the service life.

Anti-corrosion technology.

Fast and even heating.

Powder eco-friendly painting.

12 popular manufacturers of heating radiators

Manufacturers of heating devices offer a wide range of choices for buyers. Modern technologies have significantly reduced the size and weight of radiators. It became possible to choose the metal from which the product will be made and its functionality. Below are 12 popular radiator manufacturers.

Rifar

The Rifar company was established in 2002 in Russia and is a manufacturer of the latest series of high-quality radiators. Such heating devices are excellent for use in Russia and the CIS countries. Users highly appreciate the advantages and distinctive characteristics of the models of this company. Rifar confirms its own confidence in the excellent quality of its products by actions - the company has entered into an agreement with an insurance company to insure all risks that will be associated with the use of radiators.

Royal Thermo

Royal Thermo is one of the largest manufacturers of heating devices. The company has implemented European quality and environmental management systems. Each production step undergoes multi-stage control. Radiators comply with international standards.

Kermi

German manufacturer of steel radiators Kermi, known in the heating products market for 50 years. Produces smooth and profile panel models with high-quality coating and a built-in valve for power regulation.Such heating devices have earned a good reputation not only in Germany, but also in Russia.

Oasis