How to inflate a cheesecake at home

Tubing is a lightweight round sled designed for riding on snowy surfaces. Has excellent gliding on snow. Consists of a car camera placed in a durable case. Equipped with comfortable handles and a towing strap. There is nothing complicated in its design, but you still have to inflate the cheesecake.

Tube and tubeless tubing

They have significant differences from each other. Let's look at the more important ones:

How to inflate a cheesecake

It’s not difficult to inflate at home. Can be inflated in several ways. The main thing is to choose the most suitable one and follow the instructions below.

Compressor

The fastest way to inflate a cheesecake. It will take no more than 10 minutes.It is advisable to use a compressor with a quick-release fastener. Suitable for any diameter. Connect the compressor and begin to gently inflate the tube until the cover is completely filled with air.

It is advisable to shake the cheesecake periodically to make the filling more uniform. If you see a small unevenness, press on it with your hands, squat down, press with your knee. This way the rubber will quickly acquire the elasticity it needs. Disconnect the hose and put on the plug.

Hand pump

It is difficult to inflate with a hand pump. But if there are no other options, then get to work. This will take at least 1 hour. The procedure is the same as for the compressor.

If there is no pump

Order the tubing ready-made (inflated). This is the best option in this case. And if it deflates a little, you can inflate it with a bicycle pump.

Step-by-step instructions for beginners

So, you purchased the tube, unpacked it, all that remains is to inflate the cheesecake. We attach step-by-step instructions:

1. Straighten and inspect everything for damage.
2. Unzip the zipper and insert the camera into the case.
3. We center it relative to the central ring (the place for the “fifth point”), the nipple should look up.
4. Connect the pump and start the process.
5. Screw the spool valve into the nipple and plastic cap until it stops.
6. ZIP up.
7. Press your finger on the cheesecake, if it goes in 2.5 cm, everything was done correctly.

To what pressure should I pump? At the level of 0.2 - 0.3 Atm.

Where can you inflate outside the home?

The tubing can be quickly inflated at service stations. Where is the car tire inflation service available? It can be paid or free.

If the tubing is inflated unevenly

They inflated a cheesecake with some bumps, no problem.This is acceptable. Due to their design features. Does not affect strength characteristics. You should lower the cheesecake slightly, and scroll the thickening so that it is on the back side.

The child will lean on it while riding. If the distortion looks more like a hernia, it should be replaced. Contact the seller and request a new one. Perhaps there was a defect. But this happens extremely rarely.

If the camera is damaged

If there is a minor rupture of the camera or case, repair it at home. Below are detailed instructions.

Repair

If there is a small cut on the cover, you can seal it with tape: reinforced sanitary tape (silver), “Moment” supertape. Just sew up the cut first with nylon threads and stick tape on top. Case repair:

1. Clean the edges of the hole and degrease with acetone.
2. Measure the cut, cut out the required patch, 2 cm larger than the hole, and round it.
3. Heat the surface with a hairdryer, apply glue (from the inside out).
4. Press the patch with something heavy overnight, or according to the instructions included with the glue.

If there is a hole in the camera:

1. Place it in a bath of water; air bubbles will show where the hole has formed.
2. Mark this place with a marker.
3. Treat the area near the hole with solvent.
4. Cut a patch that is several centimeters larger than the hole.
5. Release the air.
6. Apply glue (Texaso glue, liquid patches) to the surface of the patch and near the hole, press firmly.
7. After a day you can use it.

If the damage is serious, it is best to buy a new cheesecake.

Replacing the camera

The autochamber is a ring rubber tube, closed to each other, with a valve for pumping air. To buy a new cheesecake, you need to find out the radius (R) of the old one. We go to the nearest auto parts store. Size Compliance:

Useful tips

To inflate the tube according to all the rules, follow our tips:

1. The tube should be inflated at room temperature. In the cold it loses its elastic properties. As a result, it may expand disproportionately or even burst.
2. When you come home from the cold, don’t forget to lower your tubing. When the temperature changes, the pressure will increase and rupture may occur.
3. The quality of the inflated product can be easily determined by external parameters. The outer sides should have folds of equal length. Moreover, they do not go onto the sliding surface.
4. If the cheesecake is overinflated, it means it will deform faster or burst during the jump. If it is not fully inflated, it will wear out faster and require repairs.
5. Minor deformation is allowed.
6. It is better to store the tubing disassembled. First you need to deflate the cheesecake and dry it. Store the camera separately from the case so that it does not lose its appearance (from rubber).
7. When inflating, you need to monitor the position of the camera relative to the center of the case. If it moves, then while inflating, it will either clamp or be free. As a result, it quickly deforms.
8. The nipple should “look” up. It is more convenient to inflate and when sliding on the snow, the nipple will not damage the bottom of the cheesecake.

Only a properly inflated cheesecake can give you a good mood. This is the only way tubing will be not only as enjoyable as possible, but also safe!