To keep your bathroom sparkling clean, use 9 simple tricks!
A little trick
Before you start cleaning, fill the bathtub with a small amount of hot water and close the door to the room. In just a couple of minutes, a large amount of steam will form in the room, which will greatly simplify all further cleaning.
Perfect tiles
For regular maintenance of tiles, a soap solution is suitable, which should be used to wipe the tiles 1-2 times a week. However, this method is effective when there are no lime deposits or rust stains on the coating. If the tiles require more serious cleaning, 6% table vinegar will be an effective remedy. Spray the walls with it, simultaneously cleaning with a brush. If the dirt is stubborn, leave the solution for 5-10 minutes to break down the deposits. Then rinse the tiles with clean water.
Attention! Before you start cleaning, take care of your hand safety - put on rubber gloves!
Shiny taps
In order for the faucets on the sink or in the shower to take on their shiny, pristine appearance, you need to pour out table salt and pour lemon juice on top. This product copes well with deposits and rust.
Sparkling mirrors
Shaving cream will help give the mirrors a sparkling look. With its help, the mirror not only becomes clean, but also stops fogging up.A mixture of hydrogen peroxide and baking soda, which must be sprayed onto the surface and then rinsed with water, will also help remove dirt.
Flawless bath
The following solution will ensure the bath is perfectly clean: 1/2 cup vinegar, 1 cup alcohol, 1/4 cup soda and 4 liters of water. It is necessary to mix these components and apply to the bath, and after 15 minutes rinse with water.
Clean sink
It is possible to remove unpleasant soap deposits on the sink using any baby oil. It is enough to apply just one drop on a rag, and the surface will shine clean again! Heavily contaminated areas of enamel can be cleaned with a paste of mustard powder in the proportions of 1 tablespoon of mustard to 1 teaspoon of water.
No rust
The metal bottles of your favorite products often leave traces of rust on the surface of your sink or bathtub. In order to avoid its appearance, you should use a transparent varnish. Apply a thin layer to the bottom of the tins and let it dry.
Fighting blockages
Clogged sewer pipes are an unpleasant occurrence, and 4 tablespoons of baking soda and half a glass of vinegar will help you deal with it. After using them, close the drain hole and wait 10-15 minutes. After this time, you can turn on the hot water. The greatest effect is achieved with strong pressure.
Clean curtains
From constant exposure to water, the shower curtain becomes moldy and acquires an unpleasant odor. In this case, you need to wash it in the washing machine with half a glass of baking soda added.This cleaning method will not only give the curtain its original appearance, but also disinfect its surface.
