How to clean a bathtub white: means and methods

People often come across the important question of how to clean a bathtub until it’s white. If the housewife cares about cleanliness in the house, she should remember that the bathtub must be washed regularly. The safety of all family members during water procedures depends on its cleanliness. Sanitation should always remain a top priority.

Over time, plaque and rust make themselves felt. They are formed due to hard water. And even new plumbing becomes less and less attractive over time. In order for the entire bath to become shiny and clean again, you need to know and use certain tricks.

Modern means

The market for cleaning supplies is full. Many manufacturers advertise their products and release new and improved products to clean your bathtub white. There are no difficulties when using them.

The most popular means are:

Comet has a long lasting effect. It is easy to apply. Fights rust and other contaminants;
Domestos can be used regularly. Works well on a variety of stains. Doesn't have a very pleasant smell;
Cillit Bang is a common remedy that can be used frequently. Copes with simple stains;
Cif is a universal method and assistant to any housewife;
Pemolux has soda inside. Therefore, it can be used frequently. Quickly copes with plaque and dirt;
Mister Clean is another famous remedy that is often shown on television. Well suited for acrylic surfaces. Removes all contaminants.

Despite all the positive reviews and great popularity, you need to be careful when using them.

Traditional methods

There are many folk remedies that effectively deal with yellowness and dark plaque and make the bath white again. Their main advantage is availability and low cost.

One of the most common methods is baking soda. Its advantages include low cost and high efficiency. Thanks to it, you can forget about plaque and dirty stains. It is worth applying a small amount of this product to the surface that needs to be cleaned. Then use a damp sponge or rag to start working. However, you need to use baking soda carefully. Since its particles can scratch the surface of the bath. This method brings an amazing effect almost after the first use.

Another common method is the use of citric acid. It is used to clean various surfaces, including cast iron. Before using it, you need to dilute it with water. The proportion should be like this - a glass of water per one packet of product. After preparation, you need to wipe the problem areas. You can also completely fill the bath and leave for about twenty-five minutes. Then rinse with water. If necessary, you can then use baking soda.

Another proven solution is vinegar. In its action it is slightly weaker than soda. Therefore suitable for new sanitary ware. You can clean bathrooms and bathtubs with it for quite a long time.Therefore, to save time, you should use the following method.

Moisten paper towels with vinegar and cover the entire contaminated surface with them. Leave the solution to soak for some time. Then remove the napkins. And rinse everything with water.

A solution of mustard helps with rust. Mustard must first be diluted in water. This mixture should be left for half an hour. Afterwards, rinse with water.

If mold appears, you can use laundry soap.

All of these products are good because they do not contain chemicals, so they are harmless for cleaning the bathtub white. But even when using them, do not forget to wear gloves on your hands.

Cleaning an acrylic bathtub

Such material is very vulnerable. It often develops scratches and cracks. Therefore, you should not use hard brushes or sponges. It is best to choose gels rather than powders, as they do not harm the surface.

To clean it, it is best to use:

vinegar;
citric acid;
gels such as Sarma and others.

It is best to wipe it with a special product after each bath. To later get rid of unnecessary unnecessary hassle. Otherwise, you will have to spend a lot of effort later to return the bathtub to its white color again.

Enameled surface

Rust on such a surface occurs in places where water accumulates. Small stains eventually turn into difficult-to-remove rust. To combat it, people resort to many methods and methods.

When dealing with such a problem, it is important to reliably protect your hands from exposure to chemical elements.

Best for rust removal:

turpentine;
soda;
mustard;
ammonia along with hydrogen peroxide;
special ready-made products that are sold in supermarkets;
as well as citric acid.

Any of the listed substances should be applied for several minutes. Then wash them off with a large stream of water. You can use a shower for these purposes. To achieve the desired result, the procedure should be performed several times.

Important Tips

There are a number of rules that will make cleaning easier for any housewife. These include the following:

You should wear gloves when cleaning the bathroom. They will be able to protect the delicate skin of the hands from exposure to chemicals;
Before cleaning, remove all items located on top;
you need to constantly monitor the condition of the bathroom and take care of it in order to prevent many unpleasant consequences;
Do not use too harsh means;
If possible, you should give preference to natural products for cleaning contaminated surfaces;
you need to be patient. It must be remembered that the contamination occurred over months or years. And accordingly, it is difficult to get rid of it in a few minutes;
when using a potent product, use only soft brushes;
choose a detergent depending on the source material;
folk remedies can be left for a while for a better effect. Then rinse with water;
It’s better to start with lighter remedies. And if necessary, use stronger ones.

Precautionary measures

The following tips will help prevent unpleasant consequences when washing the bathtub white:

care should be taken to ensure that chemicals do not come into contact with the eyes or skin;
children and animals should be kept out of the bathroom while cleaning;
after using chemicals, it is advisable to ventilate the room;
All used materials, such as rags or sponges, must be thoroughly washed and disinfected. Or throw it away;
you should not experiment unless you know exactly the consequences;
After work, you should wash your hands thoroughly.

You should always remember safety.

It is best to prevent all phenomena than to get rid of them later. When yellow spots first appear, they should be removed immediately. Otherwise, they may soon develop into rust. Which will be much more difficult to get rid of.

One of the best bath cleaners is one that is safe and yet delivers really good results. The choice depends on the material and condition of the surface, as well as on the individual preferences of the housewife. In addition, the cost and availability of the product plays a role. You shouldn’t chase popular names; it’s better to give preference to methods that have been proven over the years to help restore the whiteness of your bathtub.