Inexpensive gasoline snow blowers are designed for cleaning small areas - adjacent areas, parking spaces. This price segment includes both two-stage and single-stage wheeled models. The width of the device’s bucket does not exceed 50–55 cm, the engine power is 6-7 hp. Cheap snowplows have practically no additional functions (backlight, heated handles, electric start). But at low temperatures, most budget models work without difficulty.
PATRIOT PS 603
Maneuverable single-stage snow blower. Engine 6.5 horsepower.
The width of the snow grip is 56 cm, the height is 40 cm. The bucket is height adjustable. The device easily crushes dense and compacted snow, removes crust and ice. The snow removal socket is rotatable and adjustable in height and direction. Ejection range 10 m. 5 forward and 2 reverse speeds. The engine starts with a manual starter and operates without interruption at temperatures down to -25°C.
Components made from high-quality materials: bronze bearings and gears, screws made of wear-resistant metal.
Large, stable wheels (33 cm) made of durable rubber.
Possibility of adjusting the bucket and chute to remove snow.
Affordable price.
Huter SGC 4100 WIDE
A budget model from a well-known manufacturer, designed for snow removal in areas of 10 to 15 acres. The overall dimensions of the bucket are 62x54 cm. The screw mechanism consists of two steel parts that crush snow, ice, and caked crust.Movement is ensured by two wheels with durable tires. The throw is 12-15 m, the bell for removing snow mass is adjusted with a handle in the direction of travel.
Huter SGC 4100 WIDE has a 7-speed gearbox (2 for reverse and 5 for forward)..
Engine four-stroke, 6.5 hp; starts with a manual starter.
Convenient control: all levers and handles are located near the support handle.
Easily moves through the snow and maneuvers.
Interskol SMB-650
Dimensions of the snow grab: width 65 cm, height 55 cm. The chute for throwing snow is movable and adjustable during operation. Release at 10-12 m.
Motor 6.5 hp functions perfectly at sub-zero temperatures. Fuel consumption is no more than 400 g of AI 92 or AI 95 gasoline per 1 kW. Starting with a manual starter.
Branded augers in the form of a ribbon with teeth.
Powerful tread wheels that do not fall into the snow when driving and maneuvering.
Ergonomic handles and control handles.
ELITECH CM 6
A model that is laconic in design and functionality, designed for use in private households. Maximum snow catching characteristics: width - 56 cm, height - 40 cm, throwing range - no more than 10 m.
6 hp motor Operates in 6 speed modes (4 forward and 2 reverse). Wheels with inflatable tires (diameter - 33 cm).
Due to its small size and weight (70 kg), it is suitable for cleaning hard-to-reach places.
Does not require complex maintenance.
The main parts (casing, body, outlet bell) are made of high-strength metal alloy.
Budget model with a two-stage snow removal system.
Daewoo Power Products DAST 6060
Lightweight two-stage snow blower with 6 hp Daewoo series 195 gasoline engine. The model has a manual transmission (4 forward, 1 reverse gears), starting with a manual starter.
The width of the snow grab is 56 cm, the height is 41 cm. Snow is removed through a plastic chute 10 m to the side. The screws are metal, in the form of relief teeth.
Stable startup and operation at low temperatures.
Light weight (54 kg) and overall dimensions make it easier to move in hard-to-reach places.
Tread wheels (diameter 30 cm).
Additional anti-corrosion treatment of parts increases the service life of the device.
CHAMPION ST556
Two-stage snow blower with an economical 5.5 hp motor. Overall dimensions of the bucket: width 56 cm and height 42 cm. Throwing range 8 m to the side. The metal chute for removing snow is adjusted by a handle from the control panel.
It operates at temperatures not lower than -10°C, and is not designed for long-term continuous snow removal.
The small size and weight of the unit (about 63 kg) is a significant advantage for cleaning small areas.
Optimal price-quality ratio: CHAMPION ST556 has no unnecessary functions for which you will have to overpay.
Convenient control system, located compactly, near the transport handles.
Parma MSB-01-761EF
Budget two-stage snow blower with excellent consumer characteristics. The width of the snow catcher is 61 cm, the height is 50 cm. The throw is 15 m to the side. Gasoline engine, 7 hp. Gearbox with 8 speeds (2 rear, 6 forward).
Additional functions - lighting for work in the dark and manual adjustment of the chute for throwing snow (handle on the front panel), electric starter.
Durable metal auger for crushing compacted snow.
Wheels of increased diameter (14 inches).
Stability and increased maneuverability due to the increased weight of the device (about 80 kg).
Energoprom SMB-6.5/620
Two-stage snow blower with a wider bucket. The width and depth of snow capture is 62×51 cm. The augers are metal, toothed.
Motor 6.5 hp, manually started. The snow removal socket is adjusted mechanically (with a handle).
Additionally equipped with knives for cutting snowdrifts.
The engine is economical, starts well and operates at low temperatures.
The snow thrower can be easily adjusted using a plastic handle attached to the body.
PATRIOT PS 601
A powerful snow blower at an affordable price. Engine 7 hp with manual start. The overall dimensions of the bucket are 66x42 cm, there are metal strips attached to the edges that increase the gripping area. Tread wheels, diameter 14 inches. The throw distance is 10 m to the side, the direction and angle of the snow removal funnel is adjustable. The auger and impeller are made of durable metal, the auger is additionally equipped with relief teeth.
PATRIOT PS 601 operates at temperatures down to -25°, and copes with large volumes of snow.
It features high performance and ease of operation.
With high engine power and impressive overall dimensions, PATRIOT PS 601 is one of the lightest models (only 60 kg).
The device does not have a single extra function (heated handles, backlight, electric starter are not provided). Thanks to this, it is possible to maintain an affordable price for a decent model.
Carver STG-7056W
Compact snow blower with a two-stage snow removal system. The bucket is designed for a snow height of 53 cm and a width of 56 cm. Throws 15 m to the side.
Motor 7 hp, runs on AI 92 gasoline. Start with a manual starter.
6 speeds (4 reverse and two forward). Metal socket for removing snow. Device weight 72 kg.
Toothed metal augers easily crush compacted snow.
The bucket is equipped with additional metal stops for stability.
Wide tread wheels provide good maneuverability and easy running of the unit.
