Self-propelled snow blowers with wheel drive are mobile, maneuverable and quite productive. Their relatively small overall dimensions and weight will be appreciated by owners of personal plots of up to 20 acres, especially if they have to clear winding paths and hard-to-reach corners of the territory. Manufacturers equip wheeled models with powerful tread tires that provide stability and traction on the ground. The larger the diameter of the wheels, the easier it is to move on loose snow and turn the unit around.
Huter SGC 6000
Snow blower with 8 hp motor. There are two options for starting the engine: manual or electric starter.
Overall dimensions of the bucket are 62x54 cm. Augers are made of wear-resistant metal with embossed teeth. The snow removal chute is adjusted with a manual handle. Wheels with powerful tread tires of increased diameter provide maneuverability and easy movement through snowdrifts.
The transport handles are heated and the control panel is backlit.
The design is equipped with protective elements (cotter pins for working mechanisms and shoes on the chute for removing snow).
The controls are simple; starting with an electric starter is preferable in severe frosts.
Additional features make it easier to use.
Daewoo Power Products DAST 6560
Compact, powerful and lightweight unit with a 6.5 hp gasoline engine. Started with a manual starter. The control panel contains a handle for adjusting the chute and a speed switch (4 forward, 2 for reverse).
The dimensions of the snow catcher are 57x51 cm, the throw range is 12 m.
The model copes well with fresh snow, but compacted snowdrifts can cause problems. It is not recommended to work with hard snow at 3 and 4 speeds.
Reliable economical engine from Daewoo.
High performance and maneuverability (especially on loose snow).
Easy to start and operate.
Hyundai S 6561
Snow blower with wheel drive. The engine is 6.5 hp, starts with either a manual or electric starter. Captures a layer of snow 61x51 cm, throws the snow mass 11 m to the side. The snow thrower chute is metal and mechanically adjustable.
The auger is embossed, with sharp teeth. There is a headlight on the control panel.
Unit weight 61 kg.
Powerful wheel drive, 13-inch wheels with tread tires.
The auger mechanism is designed for dense snow and icy snowdrifts.
Excellent maneuverability.
MasterYard ML 7522B
Snow blower with a Briggs and Stratton motor, designed for use at subzero temperatures (power 5.5 hp). Overall dimensions of the bucket are 56x51 cm. The ejection is 10 m to the side.
Auger with raised teeth made of durable alloy. The metal chute of the snow thrower is adjusted by a lever. Wheels with tread tires of increased diameter (14 inches). Weight 78 kg.
Easy starting and stable operation at low temperatures.
Maneuverability due to branded wheels with treads.
Easy to control and move.
CHAMPION ST762E
Two-stage self-propelled snow blower with 6.5 hp motor. The bucket captures a layer of snow 62 cm wide and 51 cm high, the snow is removed 10 m to the side.The deflector socket for removing snow is adjusted by a manual lever.
The plant is equipped with an electric starter and additional lighting for work in the evening (halogen headlight).
The manufacturer guarantees stable operation of the unit only at temperatures not lower than -10° C.
CHAMPION ST762E is equipped with a 7-speed gearbox (2 reverse and 5 forward speeds).
High productivity due to a powerful engine and a larger bucket.
Reliable screw mechanism made of durable metal.
Treaded wheels for free movement on loose snow.
Daewoo Power Products DAST 8570
Snow blower with a larger bucket (captures a layer of snow 67x54 cm). Throws snow mass 15 m to the side.
Suitable for removing frozen and icy snow - ice augers are installed for this purpose. 8 hp engine designed to operate at low temperatures. Lighting is provided for evening work.
8-speed gearbox - 6 forward and 2 reverse. The weight of the unit is 103 kg.
The snow thrower socket is metal and is adjusted with a lever.
The handles are heated.
Starting with electric starter.
Husqvarna ST124
Productive snow blower with 6 hp motor. Dimensions of the snow collecting bucket are 61×53 cm. Throwing range is 12 m to the side. The socket for removing snow is metal, adjustable with a lever. Starting with electric starter.
Wheels with tread tires, diameter 13 inches. The auger and impeller are metal, designed for dense snow and ice.
With a light weight of the device (78.5 kg), decent performance and power.
Ease of control and maneuvering.
Convenient location of the snow removal chute and control levers.
Hyundai S 5556
Compact, lightweight snow blower for cleaning small areas. Motor power 5.5 hp, bucket dimensions 53x51 cm. Ejection 11 m to the side. The weight of the unit is 57 kg; when disassembled, it can be transported in the trunk of a passenger car.
Wheels with tread tires, diameter 13 inches.
The bell of the snow thrower is metal, the direction of ejection is set by a rotary lever.
Lightweight and maneuverable: even women and pensioners can handle the Hyundai S 5556.
Enough power and performance for personal use.
High-quality engine designed for use at low temperatures.
PATRIOT Siberia 62
A model with a powerful engine (7 hp), designed to operate at temperatures down to -25° C. The bucket removes a strip of snow 61×53 cm in one pass, the snow mass is removed through a metal chute to a distance of 15 m. PATRIOT Sibir 62 moves in 7 speed modes (2 rear and 5 forward). The weight of the unit is 70 kg, the most important parts of the mechanism (screws, gears, bearings) are made of high-quality materials (bronze, cast iron, durable metal alloy).
Maneuverability and increased maneuverability.
Optimal price-quality ratio.
Thoughtful engineering solutions for working at subzero temperatures.
PATRIOT PRO 777 S
A snow blower with two replaceable attachments (metal augers for removing snow and a brush with plastic bristles for leaves and dry debris). Gasoline engine, 5.5 hp. The dimensions of the bucket are 56×42 cm. The auger is steel, with durable relief teeth. The snow removal socket is adjustable, snow is thrown 10 m to the side.
6-speed gearbox (4 forward and 2 reverse).Treaded wheels move easily on snow and any hard surface (wet or slippery).
A universal multifunctional unit for removing snow and dry debris.
High performance and motor power.
Good stability and traction with the ground due to large wheels and the device’s own weight.
The weight of the PATRIOT PRO 777 S is quite high (111 kg), which must be taken into account when purchasing.
Huter SGC 4800E
Snow blower with 7 hp motor. The dimensions of the snow grab are 56×50 cm. Important parameters of the device (directions of snow ejection, the gap between the bucket and the surface) are adjusted from the front panel.
The throw is 10 m. The model operates in 7 speed modes (2 rear and 5 forward).
Starting is possible with a manual or electric starter. A powerful headlight is mounted on the control panel for working in the evening.
High-performance unit for cleaning loose and compacted snow.
Reliable components and assembly.
Maneuverability and ease of control.
PATRIOT Siberia 67CE
Snow blower for small open areas, garden plots and walkways. The bucket measures 61x53 cm. Snow is thrown 15 m. The snow thrower chute is made of metal and is mechanically adjustable (in direction and angle of rotation).
7 hp engine, 7-speed gearbox - 5 front, 2 rear.
Large diameter wheels with winter tread pattern.
Proven quality of assembly and parts.
Heated handles, work area lighting.
Powerful motor for operation at sub-zero temperatures.
CHAMPION ST662E
Model with 6.5 hp engine. and a large bucket are suitable for clearing open areas and paths of snow and ice. Dimensions of the snow grip: 56×51 cm.The ejection range is 10-12 m.
The snow removal socket is metal and is manually adjustable. Wheels with deep tread pattern, diameter 13 inches.
The weight of the device is 72 kg, maneuverability and controllability are excellent.
The augers are metal and easily crush and move snow.
Specially shaped bucket for easy snow removal.
Husqvarna ST 224
Snow blower for cleaning high compacted snowdrifts. Maximum grip height 59 cm, bucket width 61 cm. Engine 6.3 hp. starts up perfectly and operates stably at low temperatures.
The screws and bell for removing snow are metal. Adjustment of the gutter using a mechanical lever from the control panel.
Snow is thrown up to 10 m. Large diameter wheels (15 inches) do not get stuck in deep snow.
The electric starter and headlight make starting and operating the device much easier.
The handles are heated.
High-strength auger with raised teeth.
DeWORKS S 6560
Lightweight, maneuverable snow blower for garden plots and walkways. In one pass, it captures a layer of snow measuring 59x53 cm, throws snow 12 m. Adjustment of speeds in a wide range (1 rear, 4 front) and the metal chute of the snow thrower is located on the control panel.
Motor 6.5 hp designed for use in the winter season. Augers of increased strength, with powerful relief teeth.
Light weight (63 kg) with high power and performance.
Maneuverable wheel drive.
Easy to launch and manage.
