How to properly wash the floor at home

Many people believe that cleaning the floor is not difficult, that it is a simple procedure that requires a mop and a rag. However, experienced housewives know for sure that in order to properly and thoroughly wash the floor, certain rules must be followed.

First of all, it is important to consider that different floor coverings require a certain attitude and special products.

Basic rules for cleaning floors

Before you start washing, you should remove all those items that can be rearranged or lifted from the floor, which will facilitate the cleaning process as a whole. If the area is clean, then washing the floor will be much more convenient. You can remove floor lamps, chairs, flower pots. This is not too difficult, but it will save time on cleaning the floors, because you won’t have to go around unnecessary objects.

Initially, it is worth sweeping the floor, this way you can remove excess dust and debris. A broom can remove dirt from hard-to-reach places. Just before sweeping, you should wet the broom and shake off excess water.

It is best to start cleaning from distant corners, moving towards the center and then towards the exit. It is best to visually divide the room into several sections and gradually remove everything.

Do not forget that you can use different household chemicals for cleaning, but the choice should depend on the type of floor, that is, on the floor covering.

Different means are used for these types:

• for painted floors,
• for linoleum,
• for parquet,
• for plastic flooring,
• for tiles.

How to clean wood floors and linoleum

The painted floor is not very fancy, it does not require special care. If such a floor is in the hallway and in the kitchen, that is, in those places where dirt quickly accumulates, then daily washing of the floor will be required.

An unpainted floor will require more careful maintenance. Here it is not enough to simply wipe the floor; it must be washed with water and soapy water, while heavily soiled areas can be wiped with a soft brush. After this, it is best to wipe the floor with clean water and wipe dry with burlap.

This floor can be washed with the addition of ammonia or vinegar. Grease stains may disappear after leaving the solution with soap for a day.

Linoleum is easy enough to wipe clean. If you need to remove a lot of dirt, then you need to purchase linoleum care products.

Sometimes you can use laundry soap to care for this coating. However, there are a number of products that are unacceptable when washing linoleum:

• alcohol,
• turpentine,
• petrol,
• ammonia.

All these substances can cause the design to wear off, and the coating itself can also deteriorate and swell. If the linoleum begins to darken, you can wipe it with a woolen cloth to make it shine.

Washing laminate and parquet

It is customary to wash parquet floors no more than once a year; you can only wipe them with a damp cloth in order to remove dust. For complete washing, you can use a soap solution. It is worth knowing that parquet flooring is the most demanding to care for.

Laminate flooring requires wet cleaning only a couple of times a year to avoid cracks.

The floor is wiped with a damp cloth, after a good spin, it is also important to dry the surface completely.If stains are found, you need to apply a special product and then wash it off.

It is better to use only products that can be purchased in specialized stores. Alternatively, you can use acetone, but only in a certain dose. The most optimal are products with a neutral pH.

Cleaning marble and tile floors

It is better to sweep marble floors only, that is, only dry cleaning is relevant here. It is better to use a vacuum cleaner with a soft brush or hair brushes for sweeping. For such floors you cannot use soap or washing powders, because natural stone requires only special care. He is very sensitive to any usual means and especially to chemicals.

As an option, products with a neutral pH are suitable, but only in the permitted dose. To ensure that floors retain their strength and beauty longer, they can be polished with special liquid wax.

Tile floors are less fussy. Simple soapy water is enough here. This solution can be used once a week if the floors are too dirty, which often happens in the kitchen. You can use a solution of ammonia. Old stains or lime deposits can be removed by adding vinegar to water. However, you should avoid getting such solutions on the seams between the tiles. Powders and products with abrasives are not suitable for washing.